0039000219-04-R4-D

Series:	Mini-Fit® Jr™
Part Status:	Active
Lead Free Status / RoHS Status:	--
Contact End:	Pin to Pin
Moisture Sensitivity Level (MSL):	--
Length:	4.00" (101.60mm)
Wire Gauge:	24 AWG
Contact Finish:	Gold
Color:	Red
Contact Finish Thickness:	30.0µin (0.76µm)
Number of Rows:	1
Number of Conductors:	1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are commonly used in electrical and electronic applications. These short pieces of wire are made from conductors such as copper, aluminum or other metals that are insulated with a heat-resistant material such as silicone or rubber. The purpose of the insulation is to prevent short circuits, which could cause damage to your system or even cause a dangerous fire.Jumper wires are primarily used to connect two points in an electronic circuit, usually for the purpose of testing. They can be used to bypass a component in a circuit, or to connect two points that are already connected. By doing so, the circuit can be tested without replacing physical components. In some cases, jumper wires can also be used in place of a switch or a relay.Jumper wires are available in different sizes, colors, and materials according to their intended purpose. They may also have a specific length, width and insulation thickness. However, most jumper wires have a length of 120mm or less and a width of 0.6mm or less.

Pre-Crimped Leads

Pre-crimped leads are also used in electrical and electronic applications, and likewise are insulated with a heat-resistant material, such as silicone or rubber. Like jumper wires, pre-crimped leads can be found in different sizes and lengths, and the insulation diameter may vary from 2mm to 7mm.Pre-crimped leads are primarily used when the connections in a circuit need to be more permanent than what is possible using jumper wires. This is because the leads are pre-formed by professional crimpers using precision tooling. These leads are usually crimped onto terminal blocks, and can also be used to terminate grounding wires or to connect two wires together.The pre-crimped leads are designed to ensure a reliable connection between two wires or components, and also minimize the possibility of an expedient disconnection. This makes them extremely reliable for applications where frequent connections and disconnections are not recommended.

0039000219-04-R4-D Application Field and Working Principle

The 0039000219-04-R4-D is a diode-based microcontroller designed for use in embedded applications. This device is based on the Atmel AVR family of microcontrollers and comprises a programmable logic core, EEPROM memory, flash memory, and various input and output (I/O) peripherals. The AVR architecture enables the microcontroller to control its own internal timing, as well as respond to external events determined by its I/O pins.The 0039000219-04-R4-D can be used in a variety of applications, such as sensors and power regulation, and is suitable for use in applications where a minimum amount of I/O is required, and low power operation is desirable. The on-board I/O capabilities can be expanded using external components, such as voltage regulators, temperature sensors, and other devices.The microcontroller is powered by a 5V power supply and does not need an external clock to operate. It includes an EEPROM memory, which can store code and data, flash memory, which can store 32Kbytes of instructions, and an in-system programmer (ISP) for downloading programs and debuggin the microcontroller. Code can be written in C/C++ and assembly language, and compiled using AVR Studio software.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description