0039000428-02-B0-D

Jumper Wires, Pre-Crimped Leads

The 0039000428-02-B0-D application field and working principle is ideal for a range of potential applications. This includes the usage of jumper wires and pre-crimped leads. Here, we discuss the use of these components and their working principle.

About Jumper Wires

Jumper wires are simple single-ended wires that come with either a female or male-fitted lead. The wire itself typically consists of a single or multiple stranded tinned copper wire, with a silicon or PVC insulation layer around the strands to protect them from heat, chafing, or any other environmental risks. These jumpers come in a variety of sizes, and can be used with different types of current.

In a general sense, jumper wires are used to make connections between two points on a circuit. These are often used to connect two different current paths, or connect various parts of an existing circuit together. Typically, a jumper wire connects two points that wouldn’t normally be connected through normal wiring.

The flexibility of a jumper wire’s construction makes it easily adapted for a variety of uses. It could be used to connect two units in a closed circuit, to make a temporary connection quickly, or to link two separate circuit points without having to rewire a circuit.

About Pre-Crimped Leads

A pre-crimped lead is a type of custom, pre-soldered electrical cable that can be used for a variety of electrical applications, most often in power supplies and data transmission. This type of lead typically consists of two wires, with one of the wires having an eyelet or lug pre-attached to its end.

Pre-crimped leads are most often used in applications where an eyelet must be attached to the end of one of the wires. These are usually used in applications where a termination lug needs to be attached to the cable, such as in power supplies or in data transfer equipment.

The pre-crimped leads come in a variety of sizes, and are available with either 2 or 4 terminals. This makes them ideal for a wide range of applications, including connection to motors, relays, and other types of non-standard connections.

0039000428-02-B0-D Application Field and Working Principle

The 0039000428-02-B0-D application field and working principle is suitable for both jumper wires and pre-crimped leads. The working principle for both is quite simple, yet effective.

For jumper wires, the working principle is simple. A single copper wire is used to make a connection between two points on a circuit. Generally, this is done by soldering the wire to the component in question. The wire itself can be insulated with either a PVC or silicone insulation layer, in order to protect it from heat and other environmental risks. This type of connection provides an easy solution for quick circuit connections.

For pre-crimped leads, the working principle is slightly more complicated. As with the jumper wire, the two (or four) wires are joined by a single copper wire that is soldered to both ends. The key difference here is that one of the wires also comes with an eyelet or lug pre-attached to its end. This provides a secure connection to an external component such as a relay or motor, without having to cut the wire and solder it on.

Overall, both jumper wires and pre-crimped leads are some of the most versatile electrical components available, and the 0039000428-02-B0-D application field and working principle ensure that they can be used for a variety of applications. So whether you’re looking to make a quick connection, or need something a bit more secure, they’re definitely worth considering.