004236503

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Electrical components are found in almost every electronic device and appliance in existence. Specialty fuses, such as model 004236503, are one of the most important types of these electronics. A specialty fuse acts as a protective measure; it breaks the circuit it is connected to when the current or voltage exceeds a predetermined safety level. In this way, a specialty fuse can help to minimize the potential for electrical damage to a system. In this article, we will discuss the application field and working principle of the 004236503 specialty fuse.

Application Field

The 004236503 specialty fuse is designed for use in very specific applications. It is typically used for overcurrent protection in AC power circuits, including motor control circuits. The fuse has a maximum rated voltage of 300 volts, and it has a melt-off time of 5 seconds at its rated short-circuit current. It is available in a variety of ratings, including 1A, 2A, 3A, 4A, 5A, 6A, and 10A. Depending on your application, the 004236503 may be the ideal choice for you.

Working Principle

The primary job of any specialty fuse is to protect a circuit from excessive current or voltage. The 004236503 specialty fuse works similarly to other fuses; it contains a strip of wire that is designed to melt if the amount of current in the circuit exceeds the rated value.When the current is above the rated value, the wire will begin to heat up, eventually melting. This interrupts the circuit, thus preventing further current or voltage from flowing through the circuit and causing damage to the system.

When the current or voltage drops back down to an acceptable level, the fuse can be reset; the wire must be re-connected to restore the circuit. Depending on the model, this may involve either manual or automatic resetting using a resetting device.Once the fuse is reset, the current or voltage must stay within the rated specifications to prevent the fuse from blowing again.

Conclusion

The 004236503 is a specialty fuse designed for AC power circuits, such as motor control circuits. It is designed to protect circuits from overcurrent by melting a strip of wire if the current exceeds the rated value, thus interrupting the circuit. Once the current or voltage drops back down to an acceptable level, the fuse can be reset, allowing the current to pass through the circuit again.

The specific data is subject to PDF, and the above content is for reference