025501.5NRT2

Fuses are a critical component in any electrical system. The 025501.5NRT2 is a type of fuse designed for use in motor applications. It is a one-piece, self-contained device that provides over-current protection in medium-to-high voltage circuits. It is available in three different configurations, ranging from 25A to 100A.

One configuration of the 025501.5NRT2 is the “through-hole” style. This type of fuse is designed to thread through a hole in a panel or other enclosure. It is secured by a nut and two screws, which firmly hold the fuse in place. The other two fuse types are the “push-in” and “snap-in” configurations, which are designed for more convenience in installation and removal.

The 025501.5NRT2 fuse has a rated current of 100A and works on a voltage of up to 600VAC. When the current exceeds the fuse’s rated current, the internal components melt and interrupt the current flow. This helps to protect the connected circuits and prevent equipment from overheating and malfunctioning.

The 025501.5NRT2 fuse is typically used in applications that require intermediate or large loads of power, such as motors, circuit board connections, light fixtures, and variable frequency drives. Because of its low current interruption capabilities, it is not suitable for applications that require high current interruption, such as welding circuits.

The 025501.5NRT2 fuse is designed to comply with UL standard 248, which requires that fuses have a maximum temperature rise of no more than 10 degrees Celsius during operation. This helps to ensure that the fuse will not be damaged by overheating.

The 025501.5NRT2 fuse is available with both “fast-acting” and “time-delay” characteristics. The fast-acting fuses allow for instantaneous protection of the circuit, while time-delay fuses allow for some level of protection but delay the current interruption to reduce damage to connected components. The selection of the correct characteristics should be made based on the application.

In summary, the 025501.5NRT2 is a type of fuse used for medium-to-high voltage motor applications. It complies with UL standard 248 and is available in three different configurations to suit different requirements. The fuse can be configured as either fast-acting or time-delay, depending on the application\'s requirements. Its self-contained design helps to protect connected circuits from over-current damage.