0395332319

Wire Gauge or Range - AWG:	12-26 AWG
Insulation Height:	1.020" (25.91mm)
Contact Tail Length:	--
Housing Material:	Polyamide (PA66), Nylon 6/6
Contact Material:	Phosphor Bronze
Wire Strip Length:	5mm
Torque - Screw:	0.56 Nm (5.0 Lb-In)
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Positions Stamped, Retention Latches (Non-Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	-40°C ~ 105°C
Color:	Black
Wire Gauge or Range - mm²:	--
Series:	Eurostyle™ ESE 39533
Voltage - UL:	300V
Current - UL:	15A
Current - IEC:	--
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screw - Rising Cage Clamp
Plug Wire Entry:	270°
Header Orientation:	--
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	19
Number of Positions:	19
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and SocketsTerminal blocks, headers, plugs, and sockets are devices commonly used in electronics and electrical engineering to maintain the integrity and stability of connections between two or more components. They are typically modular in design, allowing for changes or adjustments in the circuit design while maintaining the stability and integrity of the overall connection between components. They are often the chosen form factor for a variety of applications, including data connections, printed circuit boards, remote control devices, and safety systems.Headers are the most common type of terminal block and are used to connect wires or other components to a printed circuit board (PCB) or other electrical part. They consist of a number of holes in an array pattern, which are used to carry signals or power from one component to another. A wire, either with a bare end or in the form of a connector or fuse block, is commonly used to connect the header to other components in the circuit. An example of a header type terminal block is the 0395332319. It features a 40-pin arrangement, and is primarily used for interconnection, grounding, and timing purposes. It is typically used in applications where a large number of signals, data or power connections need to be made between components.Plugs and sockets, as the name implies, are used to connect two components together by physically inserting the socket into the plug and forming a complete electrical connection. Plugs come in various forms and sizes and can be secured onto a board or device in order to create a connection to more than one component, such as a signal, power, or data cable. While they can be used to make a secure connection between two components, they are also used to allow for easy replacement or disconnection of components without the need to solder or rework the board. Sockets, sometimes referred to as jacks, are designed to accept plugs. They typically consist of a couple of slots that are connected to a pin or other type of connector. The pins are then soldered or fastened to an electrical circuit or board, and the plug can be inserted into the socket in order to complete the circuit connection. The types of terminal blocks, headers, plugs and sockets available vary depending on the application and the type of components being connected. Manufacturers typically develop products that are specific to the type of application they are designed for, as well as the type of current being used. As such, proper selection and use of appropriate terminal blocks, headers, plugs and sockets can be necessary for the efficient and safe operation of any electrical or electronic system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description