0395359515

Wire Gauge or Range - AWG:	--
Insulation Height:	0.472" (12.00mm)
Contact Tail Length:	0.150" (3.81mm)
Housing Material:	Polyamide (PA46), Nylon 4/6
Contact Material:	Brass
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Mating Flange
Contact Mating Finish:	Gold
Operating Temperature:	-40°C ~ 105°C
Color:	Green
Wire Gauge or Range - mm²:	--
Series:	Eurostyle™ ESE 39535
Voltage - UL:	300V
Current - UL:	15A
Current - IEC:	--
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	Vertical
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	15
Number of Positions:	15
Type:	Header, Male Pins, Shrouded (4 Side)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks, Headers, Plugs and Sockets, and the 0395359515 are all components of integrated circuits. They are responsible for both connecting components within a circuit board and providing power and control signals to those components.Terminal Blocks are used to connect circuits together, and they come in several different sizes and shapes. They’re usually made from copper or brass, and they’re held to a circuit board with screws or other fastening devices. At one end of each terminal block is a set of prongs, which connect to circuit board tracks and tracks from other components. The other end of the terminal block is then connected to a power source and ground.Headers are used for joining different parts of a circuit board. They are typically mounted along the perimeter of a circuit board, and they have one or more pins that match with corresponding holes on the board. This makes it easy to connect components to the board. Headers come in different shapes and sizes, and each pin may be specialized to send a particular type of signal.Plugs and Sockets are also used to connect components, but they do so without permanently joining them. Plugs are typically made of plastic and have pins that match with corresponding receptacles on a socket. Plugs and sockets are often used for connecting and disconnecting components, as they allow components to be removed and replaced without damaging the circuit board.The 0395359515 is an important component of integrated circuits, and it serves several key functions. It acts as a switch, and it helps to maintain a electrical connection between two components. It can also be used to regulate the amount of current flowing between two components, and it is especially useful in controlling noise in circuits.All of these components are essential for the construction and operation of integrated circuits. Without terminal blocks, headers, plugs and sockets, it wouldn’t be possible to create the complex and efficient circuits that are required for digital technology. The 0395359515 is just one small piece of the puzzle, but it is a necessary one.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description