0429.250WRM Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The application of the 0429.250WRM fuses and its working principle is widely used in the modern day circuits to improve the safety measures and protect the components from damages. In this article, we discuss about the application and working principle of the fuses.

Application of the Fuse

The 0429.250WRM fuses are usually used in devices that serve as short-circuit protection and overcurrent protection. These components are widely used in residential, commercial and industrial electrical circuits. They are also commonly used as the primary protection element in panel boards, switchgear, motors, and transformer secondary circuit.

This fuse is suitable for application with 690V working voltage and 250A rated current. This fuse requires minimum operating voltage of 590V r.m.s. and maximum working voltage of 690V. It is required to perform in accordance with IEC and VDE standards for various electrical applications.

The fuse is also used in voltage ranges between single and three phase kW, HF, DC motors, capacitors, and resistors. These components are used in outdoor mechanical equipment, such as pumps, highway sign lighting, gates, etc.

Structure of the Fuse

The 0429.250WRM fuse consists of a strong sheet metal box, which is fitted with a terminal identifier label. This box is mounted on a breaker plate. The fuse is attached to the breaker using a pair of fasteners with threads.

The fuse itself has a cylindrical body with a silver-colored head and a plastic sleeve. It also contains an indicator valve that indicates whether the fuse has operated properly or not. The device also has a pair of pins which can be used for a signal-wire connection.

Working Principle of the Fuse

The fuse acts as an Overcurrent Protection Device. In case of an overload or short circuit, the fuses will break the circuit and stop the flow of electricity. The melting of a ceramic insert within the fuse, due to the increasing current (overload), causes the interruption of the arc, thus tripping the circuit.

The current rating of the fuse determines the amount of current it can break. This means that the fuse will only break an overload (circuit fault) of current that is higher than its rated current (250A). Fuses that have higher melting point enables higher current rating for the device.

The 0429.250WRM fuse also works as a short-circuit protection device. When a short circuit occurs, the electromagnetic field created by the current raises the fuse\'s temperature. As the temperature increases, the current rises due to the resistance of the fuse’s material. This further increases the temperature, eventually melting the fuse.

When the fuse has melted, it breaks the circuit and stops the flow of electricity, thus protecting the circuit and components from damage. However, the fuse should be replaced when this happens, as it will not be able to operate again until it is replaced.

Benefits/Advantages of the Fuse

The 0429.250WRM provides several benefits including:

• Low cost, Easy installation, and Longer life span than circuit breakers
• Allows for a fast-acting response to the short circuits
• Provides a good indication that the fuse has operated
• Highly resistant to humidity and contamination
• High performance and reliability
• Can be used in extremely cold or hot temperatures

Conclusion

The 0429.250WRM is a widely used safety component in circuits due to its high performance and reliability. It works as a short circuit and overcurrent protection device with its high-temperature melting point. The fuse also provides good indication that it has operated properly in case of an overload or a short circuit.

The specific data is subject to PDF, and the above content is for reference