0430300001-02-S2-D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

• Jumper Wires

Jumper wires, otherwise known as jumper cables, are typically used to bridge a connection between two points in a circuit. The most common type of jumper wires used in electronics are all-in-one strands of conductive material such as stranded copper, steel, or tin-plated copper with an insulated outer sheath. They are also used in applications such as in soldering, making electrical connections, and as a tool for wiring small circuits. Jumper wires are available in a variety of lengths, colors, gauges (thickness), and styles to suit a variety of applications.

To ensure proper operation, the current rating of the jumper wire should be greater than the current carrying capacity of the components it will be connecting. Also, the gauge of the wire should be appropriate for the amount of current flowing through it. For example, a thinner gauge wire should be used when connecting components with low power requirements, while a thicker wire should be used when connecting components with high power requirements. In addition, the insulation of the jumper wire should be rated to a certain temperature, usually indicated in degrees Celsius (°C). This is important considering that the temperature of the environment in which the wire is operated can vary greatly.

To properly install jumper wires in an application, the highest point of the wire should be connected to the positive (or supply) terminals of the components being connected, and the lowest point should be connected to the negative (or ground) terminals. In addition, the location of the wires should be optimized by minimizing the risk of short circuits, protecting against physical damage, and reducing the risk of electric shock.

• Pre-Crimped Leads

Pre-crimped leads are specialized jumper wires specifically designed to convert electrical signals from one type of connector to another type of connector. The most common types are the “pigtail” type which is designed to make a mechanical connection between two mechanical connections and the “splice” type which is designed to make a mechanical connection between two electrical connections. The pre-crimped leads are usually composed of a conductive material such as stranded copper, steel, or tin-plated copper with an insulated outer sheath.

Pre-crimped leads are typically used to connect components and equipment in applications such as motor controls, instrumentation, and industrial automation. Due to the size and complexity of these components and equipment, the pre-crimped leads ensure a reliable connection between the components while saving time and effort. The insulation of the lead should be rated to a certain temperature, usually indicated in degrees Celsius (°C), as this is important for the conditions the lead will be operated in.

Before installing pre-crimped leads in an application, they should be visually inspected to ensure that they have not been excessively stretched, kinked, cut, or otherwise damaged. They should also be checked to ensure that they are the correct length, have proper current rating, and have the appropriate insulation for the temperature of the environment they will be operating in. Care should also be taken to ensure that the polarity of the leads is correct.

In addition, care should be taken to ensure that no parts of the installation interfere with, or damage, the pre-crimped lead in any way. This includes avoiding sharp bends and corners, properly securing the lead, and avoiding overloads or impacts that could damage the lead.

• 0430300001-02-S2-D application field and working principle

The 0430300001-02-S2-D is a robust, single-channel, industrial-grade signal selector switch that can be used in a variety of industrial applications such as motor control, instrumentation, automation, and process control. It is designed for use with two-wire or three-wire signal lines and is capable of switching up to 7 Amps of current. The 0430300001-02-S2-D also comes with a UL approved pre-crimped lead for easy installation.

The 0430300001-02-S2-D works on the principle of mechanical action. The switch, which consists of a knob and a toggle, is actuated by turning the knob clockwise or counterclockwise. When the knob is turned, it moves the toggle, which then slides the contact plates of the switch back and forth. As a result, one of the signal lines is shorted to the other, thereby making the connection. The 0430300001-02-S2-D can be used with either two-wire or three-wire signal lines, depending on the application being used.

The 0430300001-02-S2-D has been approved by UL for use in UL Class 2/3 applications and is designed for operation in temperatures ranging from -10°C to +85°C. It is also equipped with a special molded handle for easy installation in tight spaces. In addition, the pre-crimped lead is designed to provide absolute mechanical protection and maximum contact reliability.

The specific data is subject to PDF, and the above content is for reference