0430300002-04-S0-D

Series:	Micro-Fit 3.0™ 43030
Part Status:	Active
Lead Free Status / RoHS Status:	--
Contact End:	Socket to Socket
Moisture Sensitivity Level (MSL):	--
Length:	4.00" (101.60mm)
Wire Gauge:	20 AWG
Contact Finish:	Gold
Color:	Slate
Contact Finish Thickness:	15.0µin (0.38µm)
Number of Rows:	1
Number of Conductors:	1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires, Pre-Crimped Leads

Jumper wires and pre-crimped leads are examples of 0430300002-04-S0-D type electrical connectors. Jumper wires are short lengths of conductive material or wire that are designed for conducting current between two points in a circuit. Pre-crimped leads are different from jumper wires in that they are intended for permanently connecting electronics components, rather than for making circuits easily disconnectible.

The Function of Jumper Wires

Jumper wires have a variety of uses in engineering, with the primary purpose being to connect two or more points in a single electrical current. They are used to bridge gaps in circuit boards, either to connect discrete components on the board, or to bridge to other circuit boards. Jumper wires can connect several components together, such as jumpers to connect a component to an adjacent one, or to connect several components in series. As a result, a variety of wiring arrangements, such as those required in a soldering process, may be used.

The Function of Pre-Crimped Leads

Pre-crimped leads, on the other hand, are designed for permanent connections in which the components are not easily disconnected. Pre-crimped leads are created by an automated crimping machine, which places a crimped joint at the end of the lead, allowing electrical connections between components to be quickly and reliably established. This type of connection is often found with battery cells and other types of electronics that require a reliable connection between the components. In addition, pre-crimped leads can provide a more secure connection to the board itself, allowing custom wiring arrangements to be easily carried out.

The Working Principle of 0430300002-04-S0-D Connectors

The working principle of 0430300002-04-S0-D connectors is based on a series of components that contact each other to form an electrical current between them. The contact between two components results in an electrical field, which results in a current passing between them. This current is then used to provide power or a signal for the connected components. Usually, the components are held together by a metal wire or some other type of conductive material, and the connection point between them is called a terminal. Crimping is one of the main methods for creating a secure connection between two electrical components. Crimping is a process in which metal wires and cables are compressed in order to make a secure connection. The connection between the components is then secured with the help of a pre-crimped lead. The pre-crimped lead is a type of fastener that is specifically designed to form a secure bond between the components. The end of the lead is crimped to create a tight fit, ensuring that the connection point is secure and does not slip or loosen during operation.The 0430300002-04-S0-D connectors also use a special form of insulation, such as polytetrafluoroethylene (PTFE), to provide a secure environment for the components. PTFE is a type of plastic that provides excellent protection against current leakage and provides electrical insulation that is highly resistant to heat, moisture, and mechanical wear. This type of insulation prevents the components from shorting out or from developing an electrical connection with any other nearby components.In order to ensure a secure connection, the components may also be terminated with a soldering material, such as tin or lead-free solder and accompanying flux. The soldering technique is used to create an airtight seal and an extremely strong electrical connection between the two points. This method is typically used for components that require a high level of electrical insulation and physical reinforcement. For the 0430300002-04-S0-D connectors, soldering is also used for creating the terminal points, allowing the components to be firmly connected without any risk of loosening or breaking.

Conclusion

Jumper wires and pre-crimped leads are two types of electrical components found in 0430300002-04-S0-D type connectors. Jumper wires are typically used for making circuits easily disconnectible, while pre-crimped leads are typically intended for permanent connections between components. The working principle of 0430300002-04-S0-D connectors is largely based on the use of a series of components that contact each other to form an electrical circuit. These components are typically held together by a metal wire or some other type of conductive material, and the connection point is sometimes secured by the use of a pre-crimped lead. To ensure a secure connection, the components may also be terminated with a soldering material.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description