0430300002-12-V2

Jumper Wires

Jumper wires, also known as jumper cables, are common electrical connections that are used to bridge two points. Jumper wires are often used to short circuit two terminals of the same voltage. They can also be used to connect two contact points of the same voltage, or two different voltages, depending on the application. Jumpers are available in a variety of sizes and insulation, including PVC, PTFE, and silicone.

The construction of these wires is typically composed of two or more insulated conductors that are crimped into place. These conductors can be further secured with a soldered connection, ensuring a reliable connection. Jumpers are typically used for measured connections or in applications that require quick reconfiguration, such as distributed power systems.

Pre-Crimped Leads

Pre-crimped leads are similar to jumper wires, in that they are used to bridge contact points. The main difference, however, is that pre-crimped leads are designed to remain connected, while jumper wires are intended for temporary use. Pre-crimped leads are usually used in applications where the connection must stay intact, such as permanent wiring, test fixtures, or in connector assemblies.

Pre-crimped leads are usually composed of an insulated conductor that has been soldered onto a lead that is pre-crimped for attachment. This type of joint ensures a reliable and secure connection without having to solder the connection in the field. Pre-crimped leads are typically available in a variety of wire sizes and conductor materials.

0430300002-12-V2 Application Field and Working Principle

The 0430300002-12-V2 is an electrical connection system designed for use in both commercial and industrial applications. The system is composed of a set of jumper wires and a set of pre-crimped leads that are designed to provide a reliable and secure electrical connection. The jumper wires are designed to bridge contact points, while the pre-crimped leads are designed to remain connected.

The working principle of the 0430300002-12-V2 connection system is simple. The jumper wires are connected to the terminals of the same voltage and used to bridge the contact points. The pre-crimped leads are then connected to the terminal with the appropriate connector. The pre-crimped lead provides a secure connection that remains intact, while the jumper wires are used to release short-circuiting across the terminals.