Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper Wires are a type of wire used in electronics that can be used to connect two points in a circuit. These wires are typically composed of insulated copper strands which are protected from corrosion by an outer layer of insulation. The most common type of jumper wire is the twisted pair which consists of two conductive elements that are twisted together to make a pair of wires. The advantage of a twisted pair is that it reduces interference and crosstalk between different components, as the twist in the wires helps to keep the signals in the desired direction. The main drawback of the twisted pair is that they are more expensive than straight wires.

Pre-Crimped Leads

Pre-Crimped Leads are a type of wire used in electronics that is already crimped at the ends. This offers a fast and easy way to connect circuits, as there is no need for soldering. Pre-Crimped Leads are often used for prototyping or in low-volume production, as they offer a fast and economical way to make temporary connections. The main drawback of these wires is that they cannot be used in high-voltage applications, as the crimp may not be able to withstand the current. Moreover, the connections made by pre-crimped leads can be unreliable and may require frequent adjustment and maintenance.

0430300003-10-R2 Application Field and Working Principle

The 0430300003-10-R2 module is a device designed to assist in the rapid interconnection of components in a circuit. It is composed of two parts; a base unit and two leads with pre-crimped connectors. The base unit is designed to fit in an Arduino or Raspberry Pi, and the leads are used for connecting components such as sensors, relays, and LEDs. The base unit contains a resistor and a diode in order to protect the circuit from voltage and current spikes. The module works by connecting the leads to the device and/or component, then the 0430300003-10-R2 will detect the voltage and current flowing through the circuit and adjust the resistance accordingly. By using the 0430300003-10-R2, users can quickly and easily connect components in a circuit without the need for soldering.

The 0430300003-10-R2 module is a convenient and cost effective way of interconnecting components in a circuit. It can be used in any electronic project and is easy to set up and use. The device offers flexibility and convenience, and is also ideal for prototyping and low-volume production where soldering might be time-consuming or too costly. The module is designed to be compatible with almost any type of board and can be used with both analog and digital signals.

The specific data is subject to PDF, and the above content is for reference