0430310001-06-W0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper wires, pre-crimped leads, such as 0430310001-06-W0, are electrical nodes that connect two points of a circuit, such as components, ICs, or terminals. They have different uses depending on the application field, such as in prototyping, testing, debugging, and commissioning. This article will discuss the application field and working principle of the 0430310001-06-W0 jumper wire in detail.

Purpose of Jumper Wires Pre-Crimped Leads

Jumper wires are specified by four parameters: the pin count, pitch (distance between pins), the connector type, and the wire length. In the case of 0430310001-06-W0 pre-crimped leads, these four parameters are 01 Pitch 2.4mm, 35 AWG wire with a 0.807mm overall diameter, Molex connector type, and a length of 6".

The purpose of a jumper wire is to connect two points of circuits at two different parts of a board, or even between two different boards. There are several types of jumper wires, such as solid-wire jumper leads, ribbon jumper cables, and FPC jumper cables. In prototyping and testing, a jumper wire is often used to analyze a circuit and find the optimum path from one point to another.

The pre-crimped leads, such as the 0430310001-06-W0, offer several advantages over traditional jumper wires. The primary advantages include time savings, the quality of the connector, and a tighter connection with less risk of signal or power loss. Pre-crimped leads are faster to install and often result in a better connection due to the additional crimping process.

Additionally, 0430310001-06-W0 pre-crimped leads are configured for certain applications. For instance, some wire/connector combinations are designed for audio applications, some for communications, and some for power lines.

Working Principle of the 0430310001-06-W0 Pre-Crimped Lead

To understand the working principle of the 0430310001-06-W0 pre-crimped lead, let\'s first look at the construction of the connector. The lead has a Molex mating connector with a built-in pin. This pin is made of metal, and the pin is crimped into the wire at the factory. The crimp is designed to provide a sound connection between the wire and the pin. The lead also has a strain relief, which prevents the wire from being damaged due to long-term use or excessive force.

The working principle of the 0430310001-06-W0 pre-crimped lead is simple. The electrical current flowing through the wire is connected at both ends by the connector and the pin. The electrical signal enters and exits the cable through the pin, thus establishing a connection between two different points of a circuit. This connection is made possible by the crimp, which provides a secure connection at the point of contact.

Moreover, the strain relief adds an additional layer of protection to the wire. The strain relief prevents the lead from becoming damaged or disconnected due to mechanical force. Therefore, the 0430310001-06-W0 pre-crimped lead is ideal for applications that require reliable connections with minimal signal or power loss.

Conclusion

Jumper wires, pre-crimped leads, such as the 0430310001-06-W0, are important components used in many electronics applications. They offer several advantages, such as time savings, a secure connection, and a higher quality of the connector due to the additional crimping process. Additionally, the working principle of such connectors is simple. The electrical current flowing through the wire is connected at both ends by the connector and the pin. The strain relief prevents the lead from becoming damaged due to mechanical force, making the 0430310001-06-W0 pre-crimped lead suitable for applications that require reliable connections with minimal signal or power loss.

The specific data is subject to PDF, and the above content is for reference