Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are one of the most commonly used electronic components for creating electrical circuits, prototyping, and a variety of other uses. They consist of two thin wires with an electrical connection on one end, often a metal clip or solder pad, and the other end connected to a jumper connector, such as a female header. Jumper wires can come in a wide variety of lengths and gauges, depending on the application.

0430310003-10-G0 Application Field and Working Principle

The 0430310003-10-G0 jumper wire is primarily used in circuit board testing and maintenance. It is designed for making easy and repeatable connections between components on a board or in a circuit, limiting the need to solder every time a connection needs to be made. The connection is made by pushing the wire connector into the female header, creating a secure connection that cannot be pulled out accidentally. This is especially useful in applications where repeated measurements are made, such as calibration and testing.

The 0430310003-10-G0 jumper wire is typically made of stranded copper, with a diameter of 30 AWG. It has an insulation rating of 105°C and a voltage rating of 1000 V. The lead material is tinned and heat resistant to ensure a reliable connection.

The 0430310003-10-G0 jumper wire is ideal for applications where space is at a premium, as it is highly compact and can be used in very tight spaces. It is also used in applications where a connection needs to be made quickly, as it requires no soldering. The connection is made simply by pushing the wire connector into the female header.

Pre-Crimped Leads

Pre-crimped leads are another type of electronic component used for making connections on circuit boards. They are a type of jumper wire, with the same basic design of two thin wires with an electrical connection at one end (usually a metal clip or solder pad) and an insulated connector on the other end. The difference is that the wires are pre-crimped to the connector, so that no additional soldering is necessary.

Pre-crimped leads come in a variety of lengths and gauges, depending on the application. They are typically made from brass or copper wire, and are insulated with PVC or other plastic materials. The insulation rating depends on the application, but is usually 105°C or higher. The voltage rating is also dependent on the application, but ranges from 250V to 1000V. The connector is designed to provide a secure and reliable connection that can withstand vibrations and other environmental factors.

0430310003-10-G0 Application Field and Working Principle

The 0430310003-10-G0 pre-crimped lead is typically used for prototyping electrical circuits and connecting components on a circuit board. It is a compact and highly reliable connection, as it is already crimped onto the connector and does not require any additional soldering. The 0430310003-10-G0 lead is made from 30 AWG stranded copper wire, with an insulation rating of 105°C and a voltage rating of 1000 V. The connector material is tinned and heat resistant to ensure a reliable connection.

The 0430310003-10-G0 pre-crimped lead is ideal for applications where there is limited space, as it requires no soldering and is highly compact. It is also used in applications where a reliable connection needs to be made quickly, as it is ready to use immediately. The connection is made simply by pushing the pre-crimped lead into the female header or other connector.

The specific data is subject to PDF, and the above content is for reference