0500798000-06-Y8-D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

A jumper wire is a direct electrical connection between two points on a computer motherboard or on another circuit board. It is usually implemented as a set of short, insulated metal cables with male and female connectors at each end that connect two spots on a board. The wire can be soldered, but it is usually easier and faster to simply wire them together without having to solder. The jumper wires are used to route power, provide voltage or ground connections, and to test or configure different circuits.

The 0500798000-06-Y8-D is a type of jumper wire. It is a common type of jumper wire used for connecting two points on a motherboard. Its two size heads and its six pieces of wire provides good contact and good flexibility. It is usually used for testing, debugging, and connecting different power-related circuits.

Pre-Crimped Leads

Pre-crimped leads are wires that have already been soldered onto two pins (or two pieces of metal). They are designed to be easy to use and require just a few minutes to crimp the wire and get it into place. This process usually involves pushing two pins into a pair of crimp sockets, activating the crimps by pressing on the pins, and then tightening the nuts on the pins. The pre-crimped leads can then be quickly connected between two points on a circuit board.

The 0500798000-06-Y8-D is a type of pre-crimped lead. It has a length of 6 inches (15 cm) for better flexibility, good mechanical strength, and good electrical contact. Its insulation is made of high-temperature silicone, making it capable of carrying up to 9 Amps of current. Its small size also allows it to be used in tight spaces. This type of pre-crimped lead is usually used in applications such as power supplies, motor drives, and robotics.

Application Field and Working Principle

The 0500798000-06-Y8-D jumper wire and pre-crimped lead both have the same application field and working principle. These two types of wires are typically used in applications such as power supplies, motor drives, robotics, and other applications where a reliable and low resistance connection between two points is desired. They are also used in applications that require quick and easy connections and debugging.

Both the jumper wire and the pre-crimped lead work in a similar way. They both use a small electrical connector, which is then crimped onto two pins of a circuit board. When the voltage or current needs to be connected between two points, a jumper wire or pre-crimped lead is used to bridge the gap between the two points. This allows electrical currents to flow and power up the various components of the system.

The 0500798000-06-Y8-D jumper wire and pre-crimped lead are durable and reliable solutions for connecting two points on a circuit board. They are easy to install, require minimal tools, and offer a low-resistance connection. By using these types of wires, circuit boards can remain reliable and highly efficient.

The specific data is subject to PDF, and the above content is for reference