0845240004-11-L7-D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are short lengths of insulated electrical wires used to connect two points in an electrical circuit. Jumper wires are commonly seen in electronic applications such as prototyping, testing and debugging of circuits. Jumper wires are made of insulated electrical conductors and often have a crimp connector on one end, or male/female connectors on both ends.

The 0845-2400-04-11-L7-D jumper wires are an example of one type of jumper wire. These particular wires are estimated to have a working voltage of 12V, and a rated current of 2A. They are also available in different lengths, from 10 cm to 40 cm. The jumper wires also have a crimp connector on one end and a female connector on the other.

The 0845-2400-04-11-L7-D jumper wires can be used to bridge PCB traces or solder joints, allowing a safe and efficient connection between two points. In addition, they can reduce the complexity of a circuit by eliminating the need for extra wires or components, allowing for a more intricate, less bulky design.

Pre-Crimped Leads

Pre-crimped leads are very useful for any type of electrical connection. These leads have a metal contact such as a pin, spade, or terminal, on one end that is pre-crimped to the insulation material of the other end. Pre-crimped leads are used in multiple types of electrical/electronic connections such as wire-to-wire connections and to make connections with a printed circuit board.

The 0845-2400-04-11-L7-D pre-crimped leads are great for any type of electrical connection since they are reliable and easy to use. They have a single pin on one end that is pre-crimped to the insulation material on the other end. These leads are available in different sizes, ranging from 15 cm to 45 cm. The leads are constructed with copper wire and are estimated to have a working voltage of 12V and a rated current of 2A.

The 0845-2400-04-11-L7-D pre-crimped leads are used in multiple types of electrical connections, including wire-to-wire and wire-to-PCB connections. They are also suitable for routing low voltage signals through breadboards or even for making manual connections between PCB traces. The insulation material of these leads is resistant to abrasion, mechanical stress, extreme temperatures, and water, which makes them strong and durable.

Application Field and Working Principle

Jumper wires and pre-crimped leads are essential components for making electrical connections. In most applications, they are used to route signals or electricity between two points in a circuit. Jumper wires and pre-crimped leads are available in different sizes and are constructed with different materials, such as copper wire or heat-resistant insulation material. They are also estimated to have different working voltages and rated currents.

The 0845-2400-04-11-L7-D jumper wires and pre-crimped leads are constructed with copper wire and are estimated to have a working voltage of 12V and a rated current of 2A. These wires and leads are available in different lengths, ranging from 10 cm to 45 cm, making them suitable for a variety of applications. The insulation material of these wires and leads is resistant to abrasion, mechanical stress, extreme temperatures, and water, making them suitable for use in any environment. The crimp connectors and female connectors on the ends of the jumper wires provide a safe and efficient connection between two electrical points.

The specific data is subject to PDF, and the above content is for reference