0981505002

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

0981505002 (also known as automatic crimping head) is a high-performance automatic crimping head that meets the needs of many cable connection and terminal processing applications. It can be used for various conventional crimping systems or for single wire crimping systems. It is suitable for crimping large cables from 4mm2 up to 500mm2 and can be used in the cable processing of power connectors, insulation and bare terminal crimping, pre-insulating sleeves for terminals, cable processing, and other crimping requirements.

The 0981505002 automatic crimping head device has an adjustable pressure range and an adjustable stroke length. The pressure range is adjusted by using the external thumbscrew, and the stroke length is adjusted by moving the collet bracket inward or outward. The crimping die can be quickly changed by replacing an adapter with a crimping die. The adjustable range of the stroke length is 75mm, and the adjustable range of the pressure is 1-650N.

The 0981505002 crimping head consists of a main base, a lower die adapter, a die holder, a pressure setting device, a drive assembly, and a control unit. The drive assembly includes a motor, a belt, a drive wheel, and a return plunger. The motor is connected to the drive wheel, and the drive wheel is connected to the plunger assembly. The plunger assembly then moves the die in a repeating cycle.

The 0981505002 crimping head has a closed-loop system consisting of a pressure sensor, a pressure controller, and a presser switch. The pressure sensor continuously monitors the pressure applied to the crimping die and sends a signal to the controller. The controller then calculates the appropriate pressure value and sends it to the presser switch. When the pressure value reaches the preset value, the switch is triggered, and the crimping action is completed.

The 0981505002 crimping head uses a special bridging module to connect the various components. The bridging module includes a processor, memory, and a serial port. The serial port is used to connect the crimping head to the computer for programming. The processor receives commands from the computer and sends the requested data to the die holder to complete the crimping operation.

The 0981505002crimping head is widely used in the automation of wire harness processing, circuit boards,electrical engineering, battery protection, and various other manufacturing applications. The device has a flexible working process with short cycle times that can be set to crimp a wide variety of cables and terminals. It is highly reliable and cost-effective for automated and manual crimpers alike.

The specific data is subject to PDF, and the above content is for reference