1-284516-1

Wire Gauge or Range - AWG:	--
Insulation Height:	0.362" (9.20mm)
Contact Tail Length:	0.134" (3.40mm)
Housing Material:	Polyamide (PA66), Nylon 6/6
Contact Material:	Phosphor Bronze
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Mating Flange
Contact Mating Finish:	Tin
Operating Temperature:	-40°C ~ 110°C
Color:	Green
Wire Gauge or Range - mm²:	--
Series:	Buchanan
Voltage - UL:	300V
Current - UL:	11A
Current - IEC:	--
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	Vertical
Pitch:	0.138" (3.50mm)
Number of Levels:	1
Positions Per Level:	11
Number of Positions:	11
Type:	Header, Male Pins, Shrouded (4 Side)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and Sockets

Terminal blocks, headers, plugs, and sockets (commonly referred to as 1-284516-1) are essential components for any electrical connection between two components or devices, allowing for electrical and signal connections in a variety of applications. In addition to providing a secure connection, they also minimize human error as they typically eliminate soldering and crimping.When choosing the right connection components, it\'s important to choose a combination that is tailored to both the current and the application need. Choosing one that offers the proper power, dimensional and safety conformity, insulation, and temperature rating may depend greatly on the application.

Application Field

1-284516-1 terminal blocks and connectors are used in a variety of applications, from automation and robotics, aerospace and defense, medical and laboratory, transportation, and consumer electronics, to home appliances. There are multiple types of components designed for specific applications, depending on the type of connection needed. In general, these components can be divided into two categories: line-to-of connection, and plug-in connection.

Line-to-Line Connection

Terminal blocks used for line-to-line connections are designed to support a wide range of operating voltages and currents, as well as allowing for the daisy-chain connection of multiple components. This is especially useful for industrial automation that requires multiple devices connected to a single power source. By using a terminal block, the number of individual connections can be minimized, allowing for an easier and less costly installation.The most common terminal blocks used for line-to-line connections are spade terminals and pin headers. These components use a simple design, consisting of a metal body and terminals. The terminals are designed to hold multiple wires at once and can handle a wide variety of operating currents and voltages.

Plug-In Connection

The second category of 1-284516-1 terminal blocks are those designed for plug-in connection. These components are normally designed to support a higher current and voltage than their line-to-line counterparts, allowing for a more reliable electrical connection. For example, the common SO-DIMM connector is designed to connect components with higher current and voltage than the standard line-to-line connection. Plug-in connections are also designed to minimize human error by ensuring that the connection is secure and that the current is correctly routed. This is achieved by using an array of pins that make contact with the connection on the receiving device. When the connector is correctly mated, the pins are securely held in place, ensuring a reliable and safe connection.

Working Principle

1-284516-1 terminal blocks and connectors use a simple principle to achieve a secure connection between two components. The contacts, or pins, of the connector are lined up with the corresponding contact-points on the device, and pressure is applied until they are fully seated. Once seated, the pins translate electrical current securely and reliably between the two connected parts without any danger of the connection being lost. These connectors are also designed to offer a certain level of protection from electric shocks. This is achieved by making sure that the contacts are enclosed in an insulated material and using an insulation displacement mechanism for connecting multiple wires. In this manner, even if a wire were to become exposed and come into contact with a live current, the contact points and pins of the connector would prevent the shock from passing onto other wiring or components.

Conclusion

1-284516-1 terminal blocks and connectors are essential components for any electrical connection, allowing for secure connections with minimal human error. Depending on the type of connection needed, different types of connectors can be used, such as pin headers, spade terminals, and SO-DIMM connectors. These connectors are designed to work in a variety of applications, from industrial to consumer electronics, and their insulation and safety features have been designed to provide the highest quality of connection between two components and protect against electric shocks.

The specific data is subject to PDF, and the above content is for reference