1.5KE43CA-TP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS or Transient Voltage Suppressors are a type of diode specifically designed to limit transient voltages. Their primary purpose is to reduce or eliminate the damaging effects of transient voltages on electronic circuits. The 1.5KE43CA-TP is a particular varistor device that has been designed specifically for surge protection.

The 1.5KE43CA-TP device is a unidirectional Transient Voltage Suppressor (TVS) designed to protect sensitive electronic equipment from destructive transients associated with lightning and power line transients. It is ideal for use in applications such as computer networks, automotive electronics, telecoms, industrial control and consumer electronics. It is also widely used in power distribution, isolated inverting and different types of protection circuits.

The 1.5KE43CA-TP device has two main characteristics, the peak trigger voltage and the power dissipation. The peak trigger voltage determines the maximum voltage that can be applied to the device before it activates. Generally, the peak trigger voltage of this device is 41V. The power dissipation rating is the maximum power rating the device can dissipate without damage. The 1.5KE43CA-TP device has a power dissipation rating of 175W.

The 1.5KE43CA-TP device uses reverse biased junction diodes. When a transient voltage is applied to the device, its internal diodes become reverse biased and a potential is set up across the junction. This potential triggers the diode into conduction, thus limiting the voltage at the anode of the device. Depending on the type of diode used and its trigger voltage, this can result in the voltage at the anode being limited to as low as 0 volts.

The 1.5KE43CA-TP device works by clamping the voltage at the zener breakdown voltage, which is usually below the peak voltage of the transient. The device also has a fast response time which allows it to respond and clamp the voltage before it exceeds the peak trigger voltage and causes damage to the circuit. Once the voltage has been clamped, it drops as the transient energy is dissipated. This allows the protected circuits to resume normal operation when the transient has passed.

This type of Transient Voltage Suppressor has a number of advantages over other surge protection devices. It is fast and effective at short duration transients, which are typically caused by lightning strikes or power line faults. It also offers a very high level of protection and can protect sensitive circuits and components from a wide range of transient voltages. Finally, the 1.5KE43CA-TP is relatively inexpensive and easy to use, making it a popular choice for surge protection in many applications.

The specific data is subject to PDF, and the above content is for reference