1037540000

Voltage - UL:	300V
Insulation Height:	0.278" (7.06mm)
Contact Tail Length:	0.126" (3.20mm)
Housing Material:	Polyamide (PA), Nylon, Glass Filled
Contact Material:	Copper Alloy
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	IP20
Material Flammability Rating:	UL94 V-0
Features:	--
Contact Mating Finish:	Tin
Operating Temperature:	-50°C ~ 120°C
Color:	Orange
Wire Gauge or Range - mm²:	--
Wire Gauge or Range - AWG:	--
Series:	Omnimate SC
Current - UL:	10A
Voltage - IEC:	320V
Current - IEC:	17.5A
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	90°, Right Angle, Under Board
Pitch:	0.150" (3.81mm)
Number of Levels:	1
Positions Per Level:	6
Number of Positions:	6
Type:	Header, Male Pins, Shrouded (4 Side)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks – headers, plugs and sockets have become common elements used in industrial application fields. They have three distinct operating principles that are used to connect, disconnect, and transmit signals and power. The first type of terminal blocks is a physical barrier between connections. This type of terminal block is easily identified by its physical barrier, connector pins, and solder lugs or contact blocks. The physical barrier can be made of a variety of materials such as metals, plastics, or conductive materials. Its purpose is to protect the connection by enclosing it and preventing any contact from the outside environment or other electrical elements. The connector pins are used to attach the terminal block to the designated equipment or circuit board, while the solder lugs or contact blocks are used to interconnect the wires or other devices. The second type of terminal block is the electrical connector end. This type of terminal block uses contact elements that are either mechanically moved or electrically controlled to open or close a connection. These electrically controlled connectors are usually operated when the current flows or in case of a switch. The contact elements can be made from many types of materials, usually plastic, rubber, or metal. At a more advanced level, these terminals can also be digitally programmed to control the speed and operation of the connection. The third type of terminal block is the signal interface, which is responsible for providing the necessary signals to the designated device or device controllers. This terminal uses an interface protocol such as USB, RS232, or even analog signals. The device or controller will interpret the signals from the terminal and will be able to perform the necessary duties. Terminal blocks – headers, plugs and sockets have become an essential element used in many industrial application fields. Although the three main types of terminals have different purposes, they are all essential in providing a connection between various electronics devices, allowing them to interact with one another. The terminals also reduce the risk of accidental shorts or damage to the connected devices.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description