1050E86

1050E86 Application Field and Working Principle

The 1050E86 is a versatile, panel-mounted visual indicator that can be used for a variety of applications. It is designed for use in machine control, assembly line control, and process control systems. It is designed to operate in a range of 12 to 24 volts.

The 1050E86 is a microprocessor-controlled indicator, which translates system readouts into visible status. The indicator has five distinct states: standby, warning, flashing, on, and off. By switching between these different states, the indicator can signal a range of system problems or alarms.

Making the Switch

The switching capabilities of the 1050E86 is managed by a high-speed switch that can make transitions between different switch states in as fast as 0.02 seconds. This is accelerated by an internal circuit protection module that prevents impedance or resistance values from affecting the indicator status.

The 1050E86 can be triggered in one of two ways: either through an integrated timer, or by manual input. The timer can be set to initiate the switch status at a certain time interval, while the manual input allows users to switch between the five different states of the indicator at any time.

Integrating with other Systems

The 1050E86 can also be integrated with other systems either through a serial port, a CAN bus system, or a voltage input. For digital systems, the 1050E86 is compatible with standard protocols such as Modbus, CANOpen, and SAE J1939. For analog systems, the indicator can accept a wide range of voltage inputs as high as 60V DC.

The indicator is also designed to be energy-efficient. It consumes 0.75 W in standby mode and 0.9 W in active mode. This makes it suitable for use in environments where energy-saving is an important concern.

User-friendliness and Safety

For user-friendliness, the 1050E86 comes with a transparent cover that can be easily removed. This gives users quick access to the indicator\'s interior for maintenance and repairs. To prevent accidental operation, the indicator is also equipped with tamper-proof switches. When these switches are triggered, the indicator is deactivated until the switches are reset.

The 1050E86 also comes with a long list of safety features such as overvoltage and reverse polarity protection, short-circuit protection, as well as adjustable overload and time-delay settings. This makes the indicator suitable for use in hazardous or difficult environments.

Conclusion

All in all, the 1050E86 panel indicator is a reliable tool that can be used for a wide range of panel switching applications. It is easy to use, energy-efficient, and comes with a long list of safety features which makes it suitable for use in hazardous environments. If you are looking for a panel indicator that is easy to install and operate, the 1050E86 is an excellent option.