120SPC060A

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	60V
Current - Average Rectified (Io):	120A
Voltage - Forward (Vf) (Max) @ If:	600mV @ 120A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	11mA @ 60V
Capacitance @ Vr, F:	4800pF @ 5V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	SPD-3A
Supplier Device Package:	SPD-3A
Operating Temperature - Junction:	-55°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 120SPC060A rectifier is a high-power, high-speed integrating circuit (IC) diode device primarily used to provide rectification services for a variety of applications requiring a high current capacity and fast switching speeds. The 120SPC060A devices are fairly common and are designed for an assortment of different applications, including power management, switching regulators, battery charging, bridge and full-wave rectification. The diode’s performance and speed of operation make it an ideal choice for many applications.

Specifications

The 120SPC060A rectifier is a high-power, high-speed diode that is available in a variety of packages, including two- and four-pin packages, with a variety of pin spacing configurations. The maximum average forward current rating is 6A, with a peak surge rating of 30A. The maximum reverse voltage can reach 60V, providing enough current for most applications, as well as providing a security cushion in the event of inadvertent overloading. The maximum operating temperature of this device is 150°C.

Applications

The 120SPC060A rectifier is a popular choice for a variety of applications including but not limited to:

• DC-to-DC Converters
• AC-to-DC Converters
• Battery Charger Output Rectification
• High-current Voltage Regulation
• Power Supply Regulation (sampling)
• Switch Mode Power Supplies

The 120SPC060A has the potential to be used in automotive and industrial applications as well, due its superior current-carrying capabilities and switching speeds.

Working Principle

The primary function of the 120SPC060A is to mediate between a DC power source and an AC load. The diode is connected in series with the AC load, and is configured so that the negative (ground) terminal of the diode is connected to the negative terminal of the AC load. Thus, when the AC load is connected to a DC power source, the direction of power flow can be determined by the orientation of the diode’s terminals. When the current running through the diode is in the forward direction (from the positive terminal of the diode to the negative), electrical energy flows from the DC source to the AC load and is rectified by the diode. This is known as forward bias, and allows for a higher level of precision and efficiency as compared to other types of rectifiers. When the current is in the reverse direction (from the negative terminal of the diode to the positive terminal) then no power flows from the DC source to the AC load and the diode blocks the current from passing through. This is known as reverse bias, and allows the diode to act as a safety device in the event of power surges or currents that go beyond the rated amount of current.

Conclusion

The 120SPC060A rectifier is a highly efficient and powerful device that provides rectification services for a variety of applications. It boasts a peak surge rating of 30A, which can be handled by most DC-to-AC or AC-to-DC conversion operations, as well as by battery charging operations and High-current Voltage Regulation. The wide operating temperature range coupled with the fast switching speeds make the 120SPC060A device an ideal choice for many types of applications, from automotive to industrial.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description