1339222-2

Row Spacing:	--
Number of Positions Loaded:	All
Color:	Black
Contact Finish Thickness:	150.0µin (3.81µm)
Contact Finish:	Tin
Features:	Single Entry
Wire Gauge:	22-26 AWG
Cable Termination:	IDC
Mounting Type:	Through Hole, Right Angle
Series:	Pivot II
Number of Rows:	1
Board-Side Pitch:	--
Cable Pitch:	--
Number of Positions:	2 (1 Pair)
Connector Type:	Individual Wires
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular Connectors - Board In, Direct Wire to Board

Rectangular Connectors - board In, direct wire to board connectors are a versatile and cost-effective way to provide reliable electrical connections through board-mounted components. These connectors require no soldering and provide the ability to quickly disconnect and reconnect wires, eliminating the need for rewiring and costly repairs.The 1339222-2 is an example of a rectangular board-in connector used for a variety of direct wire-to-board applications. This type of connector is suitable for applications requiring 2 to 8 contacts, is 1.75 mm thick, and has a current rating of up to 6A. The connector is equipped with a contact locking system for secure connections and a contact isolation system to prevent short circuits.This connector connects to a board by means of a polarized header. The header has two small prongs on one side to secure the contacts in the board, while on the other side, it has two small grooves to secure the mating parts. The header also contains a guide rail system to ensure that the parts are properly aligned when connected.To mate the connector to the board, the board must first be prepared to accommodate the mating parts. Once the board is ready, the contacts are inserted into the header and secured with screws. The mating parts are then inserted into the header. The connector is then secured with screws.Once the connector is connected to the board, wires can be connected directly to the contacts. These contacts are usually color coded to indicate the type of wire that should be used. They can also be numbered to identify the contact position. The contacts need to be prepped in order to ensure proper electrical connections. This is done by trimming the lead with tin snips or flush cutters. Once the contact is prepped, it can be heat-shrunk or insulated with heat-shrink tubing to make the connection waterproof.The 1339222-2 is an ideal solution for direct wire-to-board applications. Its contact locking system and contact isolation system provide reliable electrical connections, while its guide rail system ensures proper alignment of the parts. This connector can be used for a variety of applications, from computers and communication devices to consumer electronics and medical devices.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description