Allicdata Part #: | 14CX11-ND |
Manufacturer Part#: |
14CX11 |
Price: | $ 267.52 |
Product Category: | Switches |
Manufacturer: | Honeywell Sensing and Productivity Solutions |
Short Description: | SWITCH SNAP ACTION DPDT 10A 120V |
More Detail: | N/A |
DataSheet: | 14CX11 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 243.19900 |
Ingress Protection: | IP66 - Dust Tight, Water Resistant |
Mechanical Life: | -- |
Electrical Life: | -- |
Operating Position: | -- |
Operating Temperature: | -25°C ~ 85°C |
Overtravel: | 75° |
Differential Travel: | 25° |
Pretravel: | 30° |
Release Force: | -- |
Operating Force: | 50gfm |
Features: | Explosion Proof |
Series: | CX |
Termination Style: | Screw Terminal |
Mounting Type: | Chassis Mount |
Actuator Type: | Side Rotary - No Lever |
Voltage Rating - DC: | 125V |
Voltage Rating - AC: | 120V |
Current Rating: | 10A (AC), 300mA (DC) |
Switch Function: | On-On |
Circuit: | DPDT |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
14CX11 is an electrical component which is used for creating distinct electrical paths for conducting electrical currents. It is also known as a snap-action, limit switch. This component is made from an enclosed plastic case with a limit switch mechanism inside it. This mechanism consists of a plunger that is activated when a certain amount of force is applied at a certain predetermined point.
The working principle of a 14CX11 snap-action, limit switch is that it is activated when a certain amount of force is applied at a certain predetermined point. When this happens, the plunger is forced downward and this causes the internal contacts of the component to come into contact. When this happens, an electrical path is created that allows electrical current to pass through the component.
The main application of the 14CX11 component is in limit switching applications such as door stops, levelers, and over-current protection applications. In limit switching applications, the 14CX11 component is used to detect a predetermined level of force and to activate a relay or a circuit breaker when this force is exceeded.
The 14CX11 snap-action, limit switch is also used in over-current protection applications. In these applications, the 14CX11 component is used as a safety device to detect a sudden surge in current and to stop it from reaching damaging levels. This is done by having the plunger act as a conductor and trip the circuit breaker when the current exceeds the predetermined level.
The 14CX11 snap-action, limit switch is a very reliable and cost-effective component. It is used in a wide range of applications and its performance is highly dependable. It is also quite easy to install and maintain as it does not require any complicated wiring or extra components for its operation.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
EXC-14CX280U | Panasonic El... | 0.11 $ | 1000 | CMC 100MA 2LN 28 OHM SMD2... |
EXC-14CX400U | Panasonic El... | 0.11 $ | 1000 | CMC 100MA 2LN 40 OHM SMD2... |
14CX1 | Honeywell Se... | 267.52 $ | 1000 | SWITCH SNAP ACTION DPDT 1... |
14CX11 | Honeywell Se... | 267.52 $ | 1000 | SWITCH SNAP ACTION DPDT 1... |
14CX1E | Honeywell Se... | 294.43 $ | 1000 | SWITCH SNAP ACTION DPDT 1... |
LIMIT SWITCH
LIMIT SWITCH ROLLER LEVER LED
SWITCH SNAP ACTION
SWITCH SNAP ACTION
SEALED AERO SWITCH
SWITCH SNAP ACT SPST-NO 16A 125V