14RA-CBSA-1.0X2.5X0.13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF shields, which are also called electromagnetic shields, are used to protect electronic devices from electromagnetic radiation or interference. RF shields come in many forms, including absorptive and reflective. The 14RA-CBSA-1.0X2.5X0.13 is a type of reflective waveguide-based RF shield, which is typically used for broadband frequency shielding applications.

The 14RA-CBSA-1.0X2.5X0.13 RF Shield works by reflecting incoming electromagnetic radiation away from the protected device. The shield is based on the principle of wave propagation, where electromagnetic waves interact with reflective surfaces and are either attenuated or redirected. The shield has an absorptive foam layer on the inside, which helps to reduce the reflection of any frequencies that pass through it. The shield consists of two pieces of aluminum separated by a layer of foam. The foam thickness is adjustable and helps to tune the shield to the desired frequency range.

The primary application of the 14RA-CBSA-1.0X2.5X0.13 is in telecommunications. It is used to protect equipment from high frequencies that can cause interference. It can also be used to protect sensitive equipment from the effects of EMI and RFI, as well as to block out signals from unwanted sources. The shield can also be used as a countermeasure against wireless eavesdropping.

In addition, the 14RA-CBSA-1.0X2.5X0.13 can also be used in industrial, medical, and military applications, as it provides an effective solution for limiting the spread of electromagnetic radiation. It can be used to shield vulnerable areas from the impact of harmful radiation, or to reduce the amount of radiation reaching sensitive systems. For example, in hospitals, the shield can be used to protect sensitive medical equipment from interference.

When using the 14RA-CBSA-1.0X2.5X0.13 RF Shield, it is important to ensure that the shield is properly installed and sealed. Proper installation will ensure that the shield is in full contact with the affected equipment to ensure optimum performance. The shield should also be inspected regularly to ensure that it is functioning properly and is providing adequate protection.

The 14RA-CBSA-1.0X2.5X0.13 RF Shield is an effective solution for shielding sensitive equipment from hazardous electromagnetic radiation. It is easy to install and tune, and can be used in a variety of applications. It is an effective way to protect sensitive systems from interference and reduce the spread of harmful radiation.

The specific data is subject to PDF, and the above content is for reference