14RA-CBSA-2.25X5.0X0.13

Series:	10-CBS
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.130" (3.30mm)
Length - Overall:	5.000" (127.00mm)
Width - Overall:	2.250" (57.15mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF shields are a type of electromechanical device that helps prevent the passage of RF (radio frequency) signals into or out of an area of unauthorized access. RF shields are typically constructed from metal and are designed to offer a high degree of protection from RF signals.The 14RA-CBSA-2.25X5.0X0.13 is an example of an RF shield that is specifically designed for the purpose of blocking the transmission and reception of RF signals. This type of RF shield is made up of a metal enclosure that encloses a conductive material, such as steel or aluminum. The enclosure is designed so that the signals are blocked before they reach the enclosure and deflected away from the protected area.The 14RA-CBSA-2.25X5.0X0.13 shield is suitable for a variety of applications, such as consumer electronics, industrial sensors, RFID systems, and Wi-Fi equipment. In these applications, the RF shield helps to protect from interference that can be caused by other nearby radio frequencies. It is also suitable for use in mobile phones to protect against the transmission of illegal or harmful radiation.In order for the 14RA-CBSA-2.25X5.0X0.13 to effectively block RF signals, the device must be installed correctly and with the correct angle and distance from the protected area. A typical installation involves the placement of the shield between the receiving and transmitting antennas. The angle and distance of the shield from the antennas should be such that the reflected signal is least affected by any standing waves or diffraction effects.The working principle of the 14RA-CBSA-2.25X5.0X0.13 is based on the concept of Faraday cage, which is a type of metallic enclosure that prevents the passing of electromagnetic fields. In this case, the conductive material used in the enclosure serves to absorb, transform, and reflect the incoming radio frequency signals, thus blocking them from entering the protected area. Moreover, the material must be installed in such a way that any gaps or seams will not allow the signals to pass.In conclusion, 14RA-CBSA-2.25X5.0X0.13 is an RF shield specifically designed for providing protection from radio frequency signals. It is constructed from a conductive material such as steel or aluminum and is suitable for applications such as consumer electronics, RFID systems, and Wi-Fi equipment. The working principle of the RF shield is based on the concept of Faraday cage and involves the absorption, transformation, and reflection of the incoming RF signals. When properly installed, with the correct angle and distance from the receiving and transmitting antennas, the 14RA-CBSA-2.25X5.0X0.13 offers an effective solution for blocking RF signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description