1519530000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

1519530000 is the frequency used by power frequency current transformers (CTs). CTs are used to measure current and voltage based on Faraday’s law of electromagnetic induction. They are widely used to measure power consumption in power systems and industrial applications. It is important to understand how CTs work and what fields they can be applied to.

The principle behind these transformers is relatively simple. A current carrying conductor creates a magnetic field, which is what Faraday’s law of electromagnetic induction uses. An alternating current flows through the coil, which results in an alternating magnetic field. The alternating magnetic field creates an electric field and induces a current in the secondary winding of the coil. This secondary current is proportional to the primary current for in a fixed ratio.

There are two main types of CTs, which are dry-type power frequency CTs and reactive power frequency CTs. The dry-type CTs are mainly used for measuring active power whereas the reactive power frequency CTs are used to measure reactive power. CTs are used in various applications such as electric motors, automobiles, aviation, medical, energy industry, and so on.

CTs can be used in a variety of applications such as power system protection, AC metering, AC and DC motor power measurement, and transformer ratio measurement. They are also used in magnetizing current measurements, energy management systems, cable fault detection, and lightning protection systems. CTs are used to sense and protect against abnormal conditions such as over-currents, under-currents, and circuit phase unbalances. CTs can also be used for other purposes such as fault location, power system stability monitoring, directional power flow, and energy accounting.

One of the most useful applications of the CTs is in the power system protection. The transformer is used for protection against fault conditions. It is connected to the power system and can measure the current flowing through it. If the current exceeds the rated value, the transformer shuts off the system. This prevents the system from being damaged due to overload or short circuit.

The CTs can be used for AC metering as well. The CT is placed in the system and the current flowing through it is measured. This current is then used to measure the power consumed by the system. This can be used to monitor the power consumption of an industrial plant or an office building.

CTs are also used for AC and DC motor power measurement. The CT is used to measure the current flowing through the motor and this is then used to calculate the power consumed by the motor. By using the CTs, the power is accurately measured and the motor can be compared to other motors.

CTs are also used for transformer ratio measurement. This is done to ensure the transformer is working properly. The CT measures the current flowing through the transformer and this is compared to the rated value. This helps to ensure the transformer is working properly. CTs are also used for magnetizing current measurements, energy management systems, cable fault detection, and lightning protection systems.

In conclusion, CTs are used in many different applications and are a very versatile electrical component. It is important to understand their working principle and how they are used in each application.

The specific data is subject to PDF, and the above content is for reference