1537-747K

DC Resistance (DCR):	36 Ohm
Height - Seated (Max):	--
Size / Dimension:	0.156" Dia x 0.375" L (3.96mm x 9.53mm)
Supplier Device Package:	--
Package / Case:	Axial
Mounting Type:	Through Hole
Inductance Frequency - Test:	250kHz
Operating Temperature:	--
Ratings:	--
Frequency - Self Resonant:	2.9MHz
Q @ Freq:	50 @ 250kHz
Series:	1537-7
Shielding:	Shielded
Current - Saturation:	8.5mA
Current Rating:	63mA
Tolerance:	±10%
Inductance:	1.8mH
Material - Core:	Ferrite
Type:	--
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
Fixed inductors are a type of electrical component which convert electrical energy into magnetic energy. In this article, we shall be discussing the 1537-747K application field and working principle.The 1537-747K fixed inductor is typically used with filter capacitor networks, utilizing a combination of inductors and capacitors to form an LC filter. When designed and implemented into the circuit, these capacitors and inductors work to filter harmonic and transient currents passing through the circuit, minimising the amount of waste energy and providing a more reliable current overall.Specifications
The 1537-747K is a fixed inductor with a nominal inductance of 0.47uH, and that has a 5% tolerance. It is rated for a maximum working voltage of 60Vrms, with a current rating of 1.0A maximum. The maximum DC resistance is 8.24ohms.Construction
The 1537-747K is constructed from a ceramic body and copper coil cover, with a ferrite core and end caps. The ferrite is a type of magnetic material which allows higher levels of core saturation than air or a vacuum, and allows for higher levels of inductance. The coating on the copper provides a protective layer between the copper and the environment, helping to prevent corrosion or damage to the copper.Working Principle
Fixed inductors function by transforming electrical energy into a magnetic field within the core of the inductor, which then induces current flow in the enclosed coil. This induced current then creates a second, opposing magnetic field that interacts with the original magnetic field, resulting in an opposition of the current. Due to this opposition, inductance is created from the inductor, where the current is forced to reduce in intensity.Applications
The 1537-747K fixed inductor is primarily used in the construction of filter capacitor networks in digital and analog electronics, as it is designed to inherently reduce levels of harmonic current and filter out transients which may occur during the operation of the circuit. In addition, they may also be used in antenna couplers, oscillators, DC-DC converters, RF filters, PLL circuits, and audio electronic circuits.Conclusion
The 1537-747K fixed inductor is an electrical component which is designed to convert electrical energy into magnetic energy, and due to its relatively high inductance and low DC resistance, it is commonly used in filter capacitor networks to reduce harmonic and transient currents in digital and analog electronics. It is also used in a variety of other applications, which include antenna couplers, oscillators, DC-DC converters, RF filters, PLL circuits and audio electronic circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description