15KP64CA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Diodes

A Transient Voltage Suppressor Diode (TVS) is an electronic protection component which is used to protect machines from damaging voltage spikes or transients. As such, it is an important element in a device’s electromagnetic compatibility (EMC) system. TVS devices are typically designed to protect against transient overvoltage or overcurrent conditions that would otherwise damage the sensitive components of the system.

The 15KP64CA is a center-fired TVS diode designed for ESD protection of high-speed signal lines. This device is based on a planar bipole structure with a common anode which provides both low capacitance and a symmetrical response in both directions. It has a working voltage of 8V with a peak surge current of 33A. The 15KP64CA is especially suited for ESD protection applications requiring robust protection.

The 15KP64CA diode is widely used in the automotive, communications, consumer electronics and industrial markets. It is found in applications such as automobiles, cell phones, computers, and electronic devices. It can also be used in aircraft systems, computers, and medical equipment. It is also used in industrial applications where protection from high-energy transients is required.

The basic function of a TVS diode is to limit transient voltage spikes that occur from a variety of sources. It works by the quick and automatic discharge of its stored energy to the ground when a voltage transient occurs. This limits the amplitude of the voltage transient to a safe level. When not being exposed to a voltage transient, it has a very low forward resistance allowing for low signal loss.

The 15KP64CA is specifically designed to provide ESD protection of high-speed signal lines. It is ideal for applications such as USB, Serial ATA (SATA), High Definition Multimedia Interface (HDMI), Ethernet, and other high speed data signals. The device can absorb up to 15kV ESD pulses in accordance with the IEC 61000-4-2 standard.

In order to ensure that the unit is working as expected, it must be properly tested before installation. In a typical test scenario, a testing device is connected to the TVS diode. An overvoltage pulse is then applied to the diode. The device should be able to absorb the voltage without damage. The 15KP64CA should be tested in accordance with IEC–61000-4-2 standards for ESD susceptibility.

The specific data is subject to PDF, and the above content is for reference