1699876 Cable Assemblies

Series:	*
Part Status:	Active
Lead Free Status / RoHS Status:	--
Moisture Sensitivity Level (MSL):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 1699876 application field and working principle vividly explain the uses and importance of circular cable assemblies. Circular cable assemblies are intended for numerous applications. The highly advanced versions of this cable type are capable of communication, travelling power, or providing rigid support. With dedicated support, circular cables can be used in a wide range of industries.

Design of Circular Cable Assemblies

Circular cable assemblies are designed to have a perfect tubing in order to meet the requirements for the specified application. This tubing material has to be strong enough to withstand the force of bending. It is also supposed to protect the conductor from any direct structural stresses, such as tension and vibration. In addition, the outside of the cable is often covered with an insulation, which is further covered with a jacket.Other than insulation, the jacket material also offers protection from environmental and mechanical wear and tear. It can be made of either plastic or metal depending on the specification and the area of usage. For flexibility, some versions of circular cables possess a flexible coil. This coil is usually a copper alloy and it is meant to reduce the distance that the wires have to travel in order to reach a certain point.

Additional Components

Apart from the cable and insulation material there are additional components which are used as part of a circular cable assembly. Connectors, for example, are necessary in order to join the end of the cable to another power source, data source or some other component. Connectors permit the transfer of power and data without the possibility of any wastage.The connectors used are usually constructed with a contact material and a base material. The contact material is that which carries the electrical connection between the two sections of the cable. This type of contact is then coated with a corrosion inhibitor and a thermoplastic or dielectric material.Pins and sockets are another important requirement when it comes to assembling circular cables. They are used in order to securely connect the cable to the connector. Pins and sockets can be made from different metals, including copper, brass, aluminium and steel.

Working Principle

When it comes to how exactly a circular cable assembly works, it all depends on the design of the particular cable. The main components of a circular cable assembly are the cable, the connector, the pins and sockets, and the insulation material. This combination helps to form a secure connection which then allows any electricity to travel through the cable.The working principle of the circular cable relies on the principle that an electric current will only pass through a conductor. The conductor is a material which is specifically designed to allow electricity to flow through it. This electric current can be used for powering appliances, computing devices, lighting fixtures and other electronics.To ensure that the electricity is transmitted through the cable, all of the components must be properly functioning and properly insulated. If any of the components are not insulated then the current will not pass through the cable. This can be dangerous and even fatal in some cases.

Conclusion

Circular cable assemblies are used for a variety of purposes but their most common use is to provide a secure connection between two sections of electronics. The working principles of these cables rely on electricity being transmitted through a conductor. The entire assembly requires the combination of properly functioning and insulated components, such as connectors, pins and sockets, and insulation materials.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description