16NH00GL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

16NH00GL specialty fuses are typically used in electrical applications. They are designed to protect electrical circuits that are either sensitive or important, such as power supplies, motors, or other critical equipment. The specialty fuse has a series of terminals that are designated for both power and neutral connections, and its working principle is based on a current limitation principle in which the fuse will automatically blow when the total current over a given period of time exceeds a certain level.

Typically, these fuses have been designed for higher current applications, where normal fuses aren’t enough. They allow the circuit to handle higher current while still protecting it from damage caused by overloading. Generally, these devices are used to protect against energetic arcs, or short-circuits that can develop during equipment operation. Depending on the size of the electrical system, they can vary in both voltage rating and current capacity.

The working principle of the 16NH00GL specialty fuse has to do with the deformation of the contact surfaces. As the current passing through the fuse increases, the resistance of the contacts decreases to maintain a low-resistance connection. When the current reaches a certain level, the contacts are deformed, and the connection length is increased, causing the current to be limited, and an electric arc is generated to blow the fuse in order to break the circuit.

This type of fuse is designed to be either slow-blow or fast-blow. Slow-blow fuses inflate gradually and allow transient overloads to pass without disconnecting the electrical circuit. Fast-blow fuses will disconnect right away when there is an overload and have the same current overload characteristics as slow-blow fuses, but will react more quickly.

The physical structure of this specialty fuse usually consists of a metal case, a terminal connector, a separation chamber, and a center conductor. The metal casing provides physical protection as well as providing electrical insulation. The terminal connector permits connection of the fuse with external circuits, while the separator chamber is designed to hold the breaking element so it does not come into contact with the wire when the fuse needs to blow, thus preventing accidental short-circuiting of the system. Lastly, the center conductor is there to carry the current and activate the blow element.

Apart from protecting electrical circuits against overloading of current, 16NH00GL specialty fuses also offer protection against transients and electro-magnetic interference. In addition, they are a good option when needing to save space and cost, due to their compact design and simple installation. This type of fuse can be used in a variety of applications, from subtle high-precision circuits to power-hungry motor and control systems.

The specific data is subject to PDF, and the above content is for reference