170M5764

170M5764 Application Field and Working Principle

170M5764 is a bolt-on fuse manufactured by the Bussmann series from Eaton Corporation. It was built as a replacement for the older S-style fuses, and has been designed primarily for use in low-voltage electric power distribution systems. A 170M5764 fuse is able to provide a broad service application and features voltage ratings of up to 2000V AC. This fuse is also very suitable for use in applications with multi-grounds and voltages of one single flat panel location.

What is A 170M5764 Fuse?

The 170M5764 fuse is a bolt-on fuse, which means it is installed into place at the time of installation. These fuses are typically used in situations where the fuse must be directly attached to the wiring. It is a single pole, single operation fuse designed to provide protection against current overloads and short circuits. The fuse is made up of a cylindrical metal body, a bronze-filled silicone-lined center, a ceramic insulator, and two brass or bronze ends that are linked to the fuse terminals. The end pieces are typically painted yellow.

How Does A 170M5764 Fuse Operate?

The 170M5764 fuse operates in the same manner as any other medium voltage fuse does. When an excessive amount of current is passing through the fuse, or if a fault is detected, the fuse will open and protect the circuit it is attached to. This is done by the fuse melting faster than the wire creating a short circuit in the circuit and opening the circuit.

The most important aspect of the fuse is the time-current curve, which helps to determine the amount of current that is able to pass through the fuse without tripping it. The 170M5764 fuse has a 350A pre-arcing rating and an interrupt rating of 6 kiloamperes (kA).

What are the Benefits of a 170M5764 Fuse?

The 170M5764 fuse provides some distinct advantages when compared to traditional medium voltage four-pole fuses. It has a much lower profile, meaning that it can easily fit into the available space in an electrical panel. The fuse also has a much higher interrupt rating than a traditional fuse, meaning that it is able to trip at higher current levels. This means that it is able to provide a much greater level of protection for the circuit, and can provide a greater degree of safety.

Overall, the 170M5764 fuse provides a safer, more efficient, and more reliable form of protection for a variety of electrical circuits. The fuse has a much lower profile and a much higher interrupt rating than a traditional four-pole fuse, which allows it to provide a much higher level of safety and protection. Additionally, the fuse is also much easier to install than a traditional four-pole fuse, as it only requires a single installation point.