170M6501

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

170M6501 is a member of the Electrical Specialty Fuses family. Its purpose is to protect current-carrying components from overload and short circuit damages. The fuse is designed to open and break the circuit when excess current passes through it.

The 170M6501 offers a range of features appropriate for a range of circuit protection needs. It is UL recognized and CSA certified for 125V and 250V AC as a supplemental protection component and is available in several current ratings. It also meets the NEC requirements for branch circuit protection of motors and appliances.

The 170M6501 comes with a rated current of 5-30A, and voltage of 32V-400V. It has low interference capacity and no afterglow, and is suitable for open or enclosed switchgear cabinets. During operation, the fuse element is supported by a ceramic bushing or mounting plate, and a relay or contactor can be fitted to the support. The fuse is equipped with a low melting metal or resin support for long life and efficient operation.

The electrical working principle of the 170M6501 is based on the principle of thermal melting. When the over-current passes through the fuse it starts heating up the fuse element that is embedded with a lower melting point material. The heat generated warms up the pre-determined fuse element. As the element continues to heat up, its cross-section area will enlarge and the impedance increases, thus interrupting the over-current.

The 170M6501 is designed for a wide range of circuit protection applications including motor protection and distribution lines. It is also suitable for large medium-voltage distribution substations and automotive applications. General low-voltage and medium-voltage distribution systems also make use of the fuse. It is suitable for protecting lighting circuits, fire alarm systems, and other surveillance systems.

The 170M6501 is a reliable and robust fuse that can protect against over-current in circuit systems. It is UL recognized, CSA certified, and meets all current NEC requirements. The fuse is suitable for residential, commercial, and industrial applications, and can be used in a wide range of switchgear cabinets. Its thermal melting principle allows for superior protection against over-current.

The specific data is subject to PDF, and the above content is for reference