1715992

Voltage - UL:	300V
Insulation Height:	0.591" (15.00mm)
Contact Tail Length:	--
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	8mm
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Retention Latches (Non-Wire Side)
Contact Mating Finish:	Silver
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	0.2-1.5mm²
Wire Gauge or Range - AWG:	16-24 AWG
Series:	COMBICON TVFKCL
Current - UL:	8A
Voltage - IEC:	630V
Current - IEC:	10A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screwless - Spring Cage, Tension Clamp
Plug Wire Entry:	180°
Header Orientation:	--
Pitch:	0.197" (5.00mm)
Number of Levels:	1 (Mate), 2 (Input)
Positions Per Level:	9 (Mate), 18 (Input)
Number of Positions:	9
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and Sockets have a lot of different applications in the construction of electrical systems. The various components which make up a Terminal Block system can be used to connect electrical equipment together or break a connection depending on the type of component involved.A Terminal Block typically consists of one or more “busbars” which contain contact points that provide a fixed connection to a variety of electrical connections. These busbars can be used to accommodate a range of different connections from standard cables, spade lugs or screw terminals. In order to interconnect these connections, the various components of the Terminal Block system will need to be selected.The most common type of termination for a Terminal Block system is a Header, Plug or Socket. Each of these components provides a method for physically linking one connection point to another within the electrical system. Each type of termination provides different levels of protection against electrical hazards, and therefore care must be taken to ensure that the correct type is selected for the specific application.Headers are typically used for non-sensitive equipment such as fuse boxes and junction boxes, providing a secure way to connect the two components together. Headers are designed to allow connections to be made quickly and easily without the need for any additional preparation or tools. Plugs and Sockets allow for similar connections, but are generally used for more sensitive equipment such as electronic components. Plugs provide a physical barrier to prevent any accidental contact or short circuits, while Sockets allow for easier connections and disconnections since they can be swapped out without requiring any additional preparation.In order to ensure that the appropriate connections are made in the most efficient manner, a Terminal Block system is usually designed around a number of “blocks” which can be connected together in various configurations. The blocks are typically connected by using either “headers” or “sockets”, and each block can accommodate multiple connections. For example, a basic Terminal Block system might consist of two blocks, each with three connections, requiring either two headers or three sockets. A typical application could then involve using two headers to connect each of the two blocks in the system to each other.Terminal Blocks - Headers, Plugs and Sockets are commonly used in the construction of a variety of electrical systems. They provide a secure connection between components which can be easily changed if necessary. The various components available in a Terminal Block system enable a range of protection levels and provide flexibility in the creation of an efficient electrical connection. The selection of the correct type of termination for a given application is essential in order to ensure that the connection is safe, secure and efficient.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description