1722533123-11-S0-D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are small pieces of flexible, insulated wire with stripped ends that are used to connect two points in a circuit. They can be used to bridge gaps, add temporary connections, or splice multiple wires together. The 1722533123-11-S0-D jumper wire is designed for high-frequency RF applications.

Jumper wires are available in a variety of sizes and materials. The 1722533123-11-S0-D jumper wire is constructed from polyurethane with silver-plated copper wire strands. It has a round, flexible cross section and is divided into red and black leads with different insulation thicknesses.

To connect two points in a circuit with a jumper wire, the stripped ends of the wire should be inserted into the holes on the circuit board. The connection can then be secured with soldering or other techniques. Jumper wires can be used to bridge gaps, make corrections in speed or direction, or energize or de-energize devices. Jumper wires are widely used in electronics, robotics, and other applications.

Pre-Crimped Leads

Pre-crimped leads are electrical wire connectors with crimped ends that are used to electrically connect circuits. The 1722533123-11-S0-D pre-crimped lead is designed for high-frequency RF applications. It is constructed from polyester with silver-plated copper wire strands and is available in black and red colors.

Pre-crimped leads are typically used to connect multiple wires to a single connection point. To use a pre-crimped lead, the wires should be inserted into the connectors at each end of the lead. The wires can then be secured by crimping them with a crimping tool. Pre-crimped leads are often used in applications that require secure, reliable electrical connections.

Pre-crimped leads can be used for a variety of applications including power, signal, and data transmission. They are commonly used in automotive, consumer electronics, and industrial electronics applications. They are also often used in wireless applications, since the connection can be easily disconnected and reconnected when necessary.

1722533123-11-S0-D Application Field and Working Principle

The 1722533123-11-S0-D jumper wire and pre-crimped lead are designed for high-frequency RF applications. The jumper wire is constructed from polyurethane with silver-plated copper wire strands, while the lead is made from polyester with silver-plated copper strands. The jumper wire is available in black and red colors, while the lead is available in black and red. Both the jumper wire and pre-crimped lead are used to make electrical connections, with the jumper wire typically used to bridge gaps, make corrections in speed or direction, or energize or de-energize devices, and the pre-crimped lead commonly used to connect multiple wires to a single connection point.

To use the 1722533123-11-S0-D jumper wire and pre-crimped lead, the wires should be inserted into the connectors at each end of the lead. The jumper wire can then be secured by soldering or other techniques. The pre-crimped leads can be secured by using a crimping tool. These components are widely used in electronics, robotics, and other applications.

The specific data is subject to PDF, and the above content is for reference