1723764

Voltage - UL:	300V
Insulation Height:	0.591" (15.00mm)
Contact Tail Length:	--
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	7mm
Torque - Screw:	0.5-0.6 Nm (4.4-5.3 Lb-In)
Screw Size:	M3
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Positions Stamped, Retention Latches (Non-Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	0.2-2.5mm²
Wire Gauge or Range - AWG:	12-30 AWG
Series:	COMBICON MSTB
Current - UL:	16A
Voltage - IEC:	630V
Current - IEC:	16A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screw - Clamping Yoke (Tension Sleeve)
Plug Wire Entry:	180°
Header Orientation:	--
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	5
Number of Positions:	5
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and Sockets
Terminal blocks, also known as terminal boards, are used to connect the individual cables onto one power circuit. It is considered to be either a mating pair, such as headers, plugs and sockets, or as a mass-produced group of the same kind of connections, such as boards and boxes. The power terminals are commonly used in industrial applications, testing and measurements, communications and consumer electronics for connecting wires, cables and harnesses.Terminal blocks, headers, plugs and sockets are used in the same applications, but they have distinct differences. Terminal blocks are a standardized type of physical interconnect for the purpose of electrically connecting two or more conducting wires into a single connection point. It can be either a two-terminal connection point or one multi-conductor connection point. It is used to provide a place to connect and disconnect single conductors in power circuits.Headers are a type of terminal block that connect to a power source and the conductive ends of wires. Typically this type of terminal block is made of plastic material and requires the use of a soldering iron to connect and disconnect wiring during assembly. Headers are typically used in consumer electronics such as cell phones, tablets and notebook computers.Plugs and sockets are two types of connector that mate a single power source to a single conductor. Plugs are the male counterparts and they are inserted into the female part to make the connection. Plugs and sockets are most commonly used in the automotive industry for connecting sensors and other devices to a power source.Terminal blocks, headers, plugs and sockets are all used to make electrical connections in many different applications. Each provides its own unique advantages and disadvantages, depending on the application. Terminal blocks are the most widely used type of connector due to their size and ability to quickly connect or disconnect conductors in a power circuit. Additionally, they are the most economical type of connector and can be found in many home electronics or automotive applications. Headers are generally the most economical type of connector and are used primarily in consumer electronic products. Plugs and sockets are typically the most expensive type of connector, but they provide the greatest protection against dust, moisture and other environmental factors.When considering which type of connector is best for the application, there are a few things to consider. Electrical requirements of the application, size, usability, cost and environmental factors should be taken into account. Terminal blocks come in a variety of sizes and applications that range from from 2 flat terminal blocks to large power terminal blocks. Headers and plugs and sockets come in a variety of sizes and can be used in a variety of applications. It is important to carefully consider the application before selecting the connector that will be most beneficial for the particular application.In the case of 1723764, It is an ideal product for power distribution, testing and measurements. With its built-in two-conductor connection points, the product is best used for quick connections in sensitive applications. The terminal block is made of high-grade material and it is equipped with a fastener system that allows for easy installation. The product is also certified to meet international safety standards.In conclusion, the 1723764 application field and working principle has been discussed. This terminal block is an ideal choice for electrical connections in industrial, testing and measurement, communications, and consumer electronics applications. It offers a high-performance, economical and reliable interconnection solution that meets international safety standards. The product is easy to install, has a fastener system and is made from high-grade materials.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description