1754717

Voltage - UL:	300V
Insulation Height:	0.429" (10.90mm)
Contact Tail Length:	--
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	10mm
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Retention Latches (Non-Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	0.2-1.5mm²
Wire Gauge or Range - AWG:	14-24 AWG
Series:	COMBICON FKCN
Current - UL:	10A
Voltage - IEC:	630V
Current - IEC:	12A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screwless - Leg Spring, Push-In Spring
Plug Wire Entry:	180°
Header Orientation:	--
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	17
Number of Positions:	17
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks, also known as connectors, are commonly used in electrical and electronics applications to connect between two wires, cables, or other conductors. They come in various forms, such as headers, plugs, and sockets.Headers are the most basic type of terminal block, and are typically found in project boxes, lighting fixtures, and other applications where the assembly of components is not complicated. They are usually mounted on PCBs (Printed Circuit Boards), where they provide an interface for connecting electrical signals with each other.Headers typically consist of angled “tabs” that accept the components’ lugs to make actual physical contact. The tabs have a rubber gasket that prevents the lugs from slipping off when tension is applied. They also come in different sizes and contact points. For example, a 2-pin header will have two pins, and a 4-pin header will have four pins.Plugs and sockets are usually used to connect circuits when the devices are connected in parallel. Sockets are typically installed on the PCB while plugs are installed on the device. Plugs and sockets come in a variety of shapes and sizes, allowing for different levels of electrical input. They are commonly used to connect devices to a computer, or to connect devices that are powered by an AC adapter.When voltage is applied, the two leads of the plug are connected together, allowing electricity to flow through. Depending on the type of socket, they can be used to provide a ground connection to the device, or to provide a higher voltage connection.The working principle of a terminal block is based on the basic principle of electrical conductivity. An electrical current is allowed to flow from one terminal to another by passing through a conductor. The conductor is typically made of metal, but can also be other materials, such as plastic or rubber.When an electrical charge is applied to a terminal block, it acts as a bridge between two conductors, allowing electricity to flow between them. The amount of current that flows through the conductors is determined by the resistance of the conductor, as well as the voltage applied to the terminals.Terminal blocks have a variety of applications, such as providing an efficient and reliable connection between multiple electrical components. They can be used to connect boards, cables, wires, and various other circuit elements, providing a secure yet easy-to-access connection. They are especially useful for low-voltage applications, such as in medical, consumer, and agricultural settings, as they provide an effective way to control and maintain power.In short, terminal blocks - headers, plugs, and sockets - are used in a variety of applications and have a wide range of working principles associated with them. They provide a low-cost and reliable way to connect electronic circuits, allowing for a secure and efficient connection between multiple components.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description