1759017

Voltage - UL:	300V
Insulation Height:	0.339" (8.61mm)
Contact Tail Length:	0.138" (3.50mm)
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	--
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	--
Wire Gauge or Range - AWG:	--
Series:	COMBICON MSTB
Current - UL:	15A
Voltage - IEC:	400V
Current - IEC:	12A
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	90°, Right Angle
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	2
Number of Positions:	2
Type:	Header, Male Pins, Shrouded (2 Side)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks - headers, plugs and sockets are electrical components that are used to connect two or more conductors together in a circuit. The terminal blocks allow a particular point in the circuit to be accessed so that the conductors can be easily connected and disconnected. The physical components of the terminal blocks are the headers, plugs, and sockets.The most basic types of terminal blocks are the headers and plugs. These two components can be used to establish connections between two or more conductors, especially in devices that require multiple connections on a single terminal block. A header is a block that is attached to one or more wires that have already been connected together, and a plug is a component that is used to join the other conductors to the header.The sockets are also used as part of a terminal block system. These components are inserted into a panel to allow connections from a variety of different plugs. In most cases, the socket will have several different pins that correspond to different conductors, allowing multiple connections.Once the header, socket, and plug are all connected the current flow is allowed to pass through them, thus creating a circuit. The electrical current is then directed through the panel until it reaches its destination. This can be used to control or measure certain areas of the circuit, or to increase the current provided by the circuit.In addition to their role in establishing connections in a circuit, terminal blocks can also play an important role in protecting the circuits. Often, a voltage and current regulator is used in order to limit the amount of current that is allowed to flow through the circuit. This prevents too much current from passing through, which could result in a short circuit or other problem. In some cases, the regulator will also be able to detect when too much current is present and will shut off the power if the current becomes too high.The use of terminal blocks in a circuit helps to maintain the integrity of the connection between the conductors and reduce the chance of a short circuit. As such, they are essential components for any circuit.In the case of the 1759017 application field and working principle, the terminal blocks should be used to connect the different components of the circuit, such as the power supply and the control circuit. The terminal blocks should then be checked for secure connections, using a multimeter, in order to make sure that no shorts or other connection problems are present. Once this is done, the correct voltage and current can be applied to the terminal blocks in order to power the circuit and achieve the desired results.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description