1765438

Wire Gauge or Range - AWG:	--
Insulation Height:	1.122" (28.50mm)
Contact Tail Length:	0.138" (3.50mm)
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	--
Contact Mating Finish:	Gold
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	--
Series:	COMBICON MDSTB
Voltage - IEC:	630V
Current - IEC:	10A
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	90°, Right Angle
Pitch:	0.197" (5.00mm)
Number of Levels:	2
Positions Per Level:	16
Number of Positions:	32
Type:	Header, Male Pins, Shrouded (4 Side)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks, also known as headers, plugs and sockets, are the physical components of electrical devices which are used to interconnect two or more conductors. The terminal block is used to provide electrical insulation between the conductors and protect them from exposure to hazardous voltages. The primary purpose of a terminal block is safety, and as such they are designed to comply with relevant safety standards.Terminal blocks are widely used in a variety of industrial and commercial applications, including construction, telecommunication, computer networking, consumer electronics, automotive, aerospace and medical devices. They are also used in a variety of applications in the laboratory, such as microscopy and laboratory equipment. They provide the physical connection between two electronic components in the same circuit, as well as connecting two different circuits.There are a wide range of different types of terminal blocks available, each designed for a specific application. The two most common types of terminal blocks are printed wiring board (PWB) type terminal blocks and plug-and-socket (P&S) type terminal blocks. PWB type blocks are designed to fit on standard PCBs or printed circuit boards. They feature two or three levels of contact points mounted in rectangular housings. The contacts are typically made of metal or plastic, and the housings are typically made of plastic.Plug-and-socket type terminal blocks are designed to be installed directly into an enclosure, typically a wall box or chassis. They feature three sets of contacts, which are connected to the terminal’s housing. The contacts are typically made of metal or plastic, and the housing is typically a metal or plastic box. The contact and housing typically feature a threaded or snap-in feature to ensure secure connections.Terminal blocks are also available in different sizes and configurations to meet specific application needs. The size and configuration of the terminal block are determined by the size and configuration of the devices that it will be used to interconnect. For instance, if the application requires a large number of contacts, then a large terminal block may be required. On the other hand, if the application requires only a few contacts, then a smaller terminal block may be used.In addition to size and configuration, terminal blocks are also available in different styles and materials. The most common materials used for terminal blocks are plastic, metal and ceramic. The most common styles of terminal blocks are single-sided, double-sided and enclosed. Plastic terminal blocks are typically used in lower-voltage applications, while metal and ceramic terminal blocks are usually used in higher-voltage applications.The working principle of terminal blocks is based on the principle of making electrical connections between two or more sets of conductors. The terminal block’s contact points create a bridge between the conductors, which allows for electrical current to flow from one conductor to another through the terminal block. The strength of the electrical connection between the conductors is determined by the amount of current that is allowed to flow through the contact points. The amount of current that is allowed to flow through the contact points is determined by the voltage rating.Terminal blocks are an essential component of any electrical device. They are used to connect two or more sets of conductors safely and reliably. They are available in various sizes and configurations to meet the needs of different applications. In addition, their materials and styles also vary, depending on the needs of the application. Finally, the working principle of terminal blocks is based on the principle of creating an electrical connection between two or more conductors.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description