1767979

Voltage - UL:	300V
Insulation Height:	0.472" (12.00mm)
Contact Tail Length:	0.154" (3.90mm)
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	--
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	--
Wire Gauge or Range - AWG:	--
Series:	COMBICON GMSTBVA
Current - UL:	18.5A
Voltage - IEC:	630V
Current - IEC:	16A
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	Vertical
Pitch:	0.300" (7.62mm)
Number of Levels:	1
Positions Per Level:	3
Number of Positions:	3
Type:	Header, Male Pins, Shrouded (4 Side)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks, headers, plugs and sockets are electrical connectors used in industrial and residential electrical applications. They can be made of many different materials including brass, steel, copper, and various plastics. The primary use of these connectors is to provide a positive connection between two or more components, usually a power source and a load. Terminal blocks are the most common form of connector used in industrial applications. They consist of a series of terminals onto which wire ends can be attached. These are designed to prevent accidental contact with a conductor, which could cause an electrical fault. In commercial installations, these blocks are typically mounted onto a panel or a plate and are secured by screws or bolts. The most common types of terminal blocks are single pole blocks, double pole blocks, and multiple pole blocks. Headers are generally used in consumer level and some industrial applications. These are male connectors with a series of pins or sockets. Headers are used to make a connection between two or more wires. The pins on the header are usually housed in a plastic housing, with termination points for the wires that need to be connected. Headers come in a variety of sizes and pin configurations, depending on the application. Plugs and sockets are widely used in residential and industrial settings. These are male and female connectors typically used in conjunction with electrical cords or cables. The sockets typically have a series of pins that make electrical contact with the internal contacts on the plug. The two common types of plugs and sockets are hardwired and metallic. Hardwired plugs and sockets are generally less expensive than metallic plugs and sockets but are designed to provide a more secure connection. Metallic plugs and sockets are more expensive but provide more reliable electrical contact. The working principle behind all of these types of connectors is simple. Electrical current is conducted through the connector to the point of connection. The electric current is then used to power a device or circuit. Most connectors are designed to ensure that the electrical connection is maintained and is as safe and reliable as possible. Terminal blocks, headers, plugs and sockets have a wide variety of uses in both residential and industrial applications. These connectors are essential for powering devices and circuits in a safe and reliable manner. They come in a variety of sizes and configurations, and can be used to connect electrical components and cables in a variety of applications. By understanding the different types of connectors and their uses, it is possible to make an informed decision when it comes to choosing the right type of connector for a specific application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description