1769175

Voltage - UL:	300V
Insulation Height:	0.591" (15.00mm)
Contact Tail Length:	--
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	7mm
Torque - Screw:	0.5-0.6 Nm (4.4-5.3 Lb-In)
Screw Size:	M3
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Retention Latches (Non-Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	0.2-2.5mm²
Wire Gauge or Range - AWG:	12-30 AWG
Series:	COMBICON MSTBP
Current - UL:	15A
Voltage - IEC:	630V
Current - IEC:	12A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screw - Clamping Yoke (Tension Sleeve)
Plug Wire Entry:	180°
Header Orientation:	--
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	18
Number of Positions:	18
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Heads, Plugs and Sockets Terminal blocks are devices used to connect two or more electrical circuits in an electrical or electronic circuit assembly. They provide the required support for an electrical connection and also provide insulation between two or more electrical devices. Generally, terminal blocks are offered in many different configurations and range of applications including power distribution, control panel wiring, signal and communication wiring, data transmission, and data transmission safety. The most well-known type of terminal block is the insulated terminal block, which features insulation material integral with the conductor wires. Insulated terminal blocks are used for applications that require a high degree of insulation, such as in high-voltage or hazardous applications. The insulation material provides a protective barrier between the two wires as well as between the block and other components. The term Terminal Blocks - Heads, Plugs and Sockets is used to refer to the combination of a plug and a socket that are used to make an electrical connection. These components are usually constructed from metal or plastic. The heads of the plugs and the sockets should be insulated from the pins to prevent any short circuits or sparks. The pins can be of various sizes and shapes, and are generally plated for electrical conductivity and corrosion protection. The plugs and sockets used in Terminal Blocks - Heads, Plugs and Sockets provide a direct electrical connection without the need for any additional equipment. Once the plug is inserted into the socket, it establishes a firm mechanical connection and provides insulation from any electrical shock or interference. In addition, the use of these components can reduce the assembly and wiring time, as well as improve the performance of high-performance electrical systems. Socket systems, on the other hand, provide optimal electrical contacts and a wide range of features for a variety of industrial and consumer applications. These socket systems can also be used for signal transmission, as well as data transmission. A socket system can consist of several components, including a socket, plug, adapter, and/or connector, depending on the need. The socket is the primary component in a socket system and is usually composed of metal and molded plastic. Terminal blocks are generally available in both single and multimotor designs, with the former being less expensive than the latter. Both designs feature either molded, thread, or clamp terminals, or a combination of all three. Single-motor designs feature one channel, while multi-motor designs feature multiple channels. Single-motor designs are ideal for applications requiring lower cost, such as in home and commercial applications. Single-motor designs are also usually used for low-current and low-voltage applications, making them efficient and economical. Multi-motor designs are typically used for powering multiple devices or circuits and include features such as over-voltage and under-voltage protection, surge protection, reverse polarity protection, and impedance matching. Terminal Blocks - Heads, Plugs and Sockets is an integral part of any modern electrical system. With their wide range of features and configurations, these components are perfect for a variety of applications, providing an efficient and reliable electrical connection every time.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description