1776757

Voltage - UL:	300V
Insulation Height:	0.339" (8.61mm)
Contact Tail Length:	0.138" (3.50mm)
Housing Material:	Polybutylene Terephthalate (PBT)
Contact Material:	--
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Mating and Mounting Flange
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	--
Wire Gauge or Range - AWG:	--
Series:	COMBICON MSTB
Current - UL:	15A
Voltage - IEC:	400V
Current - IEC:	12A
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	90°, Right Angle
Pitch:	0.197" (5.00mm)
Number of Levels:	1
Positions Per Level:	8
Number of Positions:	8
Type:	Header, Male Pins, Shrouded (4 Side)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and SocketsTerminal blocks are versatile and widely used in the electrical engineering industry. Commonly used in industrial applications, terminal blocks are used to electrically connect two or more conductors to each other. They also provide insulation between the conductors that resolve any issue with short circuits, or other electrical faults, occurring during the connection. Terminal blocks have evolved greatly since their introduction to the industrial market, jacks, plugs and headers have been developed which help to enhance and extend the applications of terminal blocks, as well as add ease and convenience in wiring. These three components can be combined to make terminal blocks, each one designed for different uses. Each component has different features and properties that make them suitable to particular applications. Headers: Headers are generally found at the end of the terminal block, and are usually the final connection in the tray. Headers usually come in two types, bridged and un-bridged. Un-bridged headers are designed for multiple applications, such as connecting two different circuits together or connecting two points in a circuit. Headers usually come with a long metal pin, which is typically inserted in the middle of the terminal strip. This pin is designed to provide an electrical connection and maintain contact with the wire coming from the socket. Plugs: Plugs are designed to provide the electrical connection between the wire and the back of the terminal block. A plug is usually made of plastic or metal, and can be either inserted in the end of the terminal block, or connected to the back of a socket. The plug is typically secured with two metal screws, which provide the needed contact between the terminal block and the wire. Sockets: Sockets are designed to provide the electrical connection between the wire and the connection point. They are designed to make sure the wires have a secure connection, and are usually fitted with two screws for the connection point. The socket typically comes pre-wired and ready for the installation. These three components can be combined to form the perfect terminal block set-up, depending on the needs of the application. By using the appropriate plugs, headers and sockets, a terminal block system can be designed for various applications. Different combinations of the components can be used to achieve different results, such as a direct connection to the power source, a short circuit protection, or an isolated connection. Terminal blocks provide a simple and cost effective way to wire a circuit and are commonly used in industrial applications. With the help of headers, plugs and sockets, a terminal block setup can be designed for any application, and be made to provide the perfect solution for any wiring needs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description