1813075

Voltage - UL:	300V
Insulation Height:	0.472" (12.00mm)
Contact Tail Length:	0.154" (3.90mm)
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Locking Ramp, Mounting Flange
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	--
Wire Gauge or Range - AWG:	--
Series:	COMBICON GMSTBVA
Current - UL:	18.5A
Voltage - IEC:	630V
Current - IEC:	16A
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	Vertical
Pitch:	0.300" (7.62mm)
Number of Levels:	1
Positions Per Level:	12
Number of Positions:	12
Type:	Header, Male Pins, Shrouded (4 Side)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and Sockets

Terminal blocks, also known as headers, plugs and sockets, are components used to connect two or more electrically conductive materials together. They are typically used in an electrical circuit to connect switches, capacitors, resistors or other components. They can also be used for protection from excessive current.Terminal blocks are typically composed of an insulated body, contacts and screws. The body is typically made of plastic and is designed to be mounted on a circuit board, usually a printed circuit board (PCB). The contacts are either metal tabs or wire leads that are inserted into the body of the terminal block. The screws are then used to tighten or loosen the connection. Terminal blocks are available in a variety of styles, and can be used in a wide range of applications. The most common types of terminal blocks are:

• Juxtaposition Terminal Blocks: These are designed to connect two or more conductive components in a single line without the risk of short circuits. They can be used to connect two wires in a single line, or two components in a multi-wire layout.
• Punch Terminal Blocks: These are designed for use with punched-out terminal blocks. The contact of the punch terminal block is punched through the insulation and is then fed through the terminal block where it is connected to a conductor. This type of terminal block is often used to connect two conductive wires without the need for soldering.
• Screw Terminal Blocks: These are the most common type of terminal blocks. A screw terminal block is made up of an electric conductor which is then held by two screws. It then has a terminal which is fixed through a hole in a metal plate. This type of terminal block is typically used in larger applications such as commercial and industrial wiring.
• Molex Terminal Blocks: These are designed for use with Molex connectors. A Molex connector is an electrical connector that is used to make connections between two wires. The contacts on the Molex connectors are designed to fit snugly into a Molex terminal block.
• IDC Terminal Blocks: These are designed for use with an insulation displacement connector (IDC). IDCs are a type of electrical connector that is used to connect a wire without the need for soldering. They are designed to make a secure connection simply by pressing the wire into the terminal block.

In addition to their common use in electrical circuits, terminal blocks are also used in communication systems. They are used to connect telephone and network wires, as well as fiber optics. They can also be used to connect video cables to a video monitor or recording device.Terminal blocks are relatively simple components, however they can be used in a variety of ways to connect, protect and manage electrical power and signal in a variety of applications. They are an essential component in any electrical system, and can help optimize performance and reduce errors.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description