1817440

Voltage - UL:	300V
Insulation Height:	0.560" (14.22mm)
Contact Tail Length:	--
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	9mm
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Ejector Latches, Retention Latches (Non-Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	0.14-1.5mm²
Wire Gauge or Range - AWG:	16-28 AWG
Series:	COMBICON FK-MCP
Current - UL:	8A
Voltage - IEC:	320V
Current - IEC:	8A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screwless - Push-In Spring
Plug Wire Entry:	180°
Header Orientation:	--
Pitch:	0.150" (3.81mm)
Number of Levels:	1
Positions Per Level:	4
Number of Positions:	4
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and Sockets

Terminal blocks, headers, plugs and sockets are all important components of electrical systems. Their primary purpose is to provide a connection point for electrical components to be connected to a power supply, signal, or other source of energy. In addition to providing a connection point, they also aid in the transfer of power, signal, or other sources of energy.Terminal blocks are the most common form of connection points in electrical circuitry. They are typically rectangular or square blocks and are made of plastic or metal, depending on their application. The terminals on the blocks are typically male or female, depending on the type of connection that is necessary. The terminals generally provide a secure and reliable connection point for the electrical components in the circuitry. Headers are similar to terminal blocks, but are often used for connecting circuit boards together. They are usually longer than terminal blocks and are usually used to link multiple circuits together. Headers can also be used for attaching test probes to circuits and troubleshooting. Plugs are electrical components used to connect circuit boards together. They are typically attached to the end of a wire in order to provide a connection point to the board. Plugs can also be used to join two or more wires together, depending on their application.Sockets are the opposite of plugs and are used to connect wires or circuit boards to other devices. They are generally connected to the end of a wire, but there are some exceptions. A common example is an audio jack that is used to connect a stereo system to a television or other device. These components are all important pieces of electrical circuitry and are used in many different applications. They provide the essential connection points between the various parts of the system and enable the smooth and efficient transfer of energy, signal, or other power sources. Depending on the application, the choice of terminal block, header, plug, or socket must be determined to ensure that the connection is secure and reliable. Terminal blocks, headers, plugs, and sockets can be found in a variety of sizes, shapes, and materials. The choice of the correct components needs to be done carefully for the application to be successful. For example, if a terminal block is used in a low voltage application, then a plastic type may be sufficient, but if a higher voltage application is required, then metal terminal blocks could be a better choice. Similarly, plugs and sockets must be chosen based on their intended use in order to ensure the connection is both secure and reliable. When selecting these components, it is important to consider the materials they are made from and how they fit into the system. The materials chosen should be strong and durable enough to withstand the environmental conditions in which the components will be used and not easily degrade or corrode over time. In addition, the components should fit securely to ensure that the connection is not compromised. Overall, terminal blocks, headers, plugs, and sockets are important components of any electrical system. Their primary purpose is to provide connection points for the different components of the system, and also for transferring energy, signal, or other power sources. Depending on the application, the right material and size should be chosen in order to ensure a secure and reliable connection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description