1850120000

Wire Termination:	Screw - TOP Clamp
Screw Thread:	M2.5
Torque - Screw:	0.4-0.5 Nm (3.5-4.4 Lb-In)
Screw Material - Plating:	--
Clamp Material - Plating:	--
Contact Material - Plating:	Copper Alloy - Tin Plated
Housing Material:	Polyamide (PA), Nylon
Operating Temperature:	-50°C ~ 100°C
Color:	Orange
Features:	Interlocking (Side)
Series:	Omnimate TOP1.5GS
Mounting Type:	Through Hole
Wire Gauge:	14-26 AWG
Mating Orientation:	Horizontal with Board
Pitch:	0.200" (5.08mm)
Positions Per Level:	2
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Wire to BoardTerminal blocks are a type of electrical connector designed to facilitate the connection of wires to components. They provide a termination point for wires, and allow the easy insertion of components into the circuit. Terminal blocks are especially useful in those circuits which require a large number of individual wires to be connected together in a relatively small space.Terminal blocks are available in two basic types - wire to board and board to board. The former type is used when the circuit involves two different types of boards - usually a circuit board and a printed circuit board. In this configuration the wires from the circuit board are connected directly to the component on the printed circuit board.Wire to board terminal blocks are also sometimes used to provide electrical power and ground connections between two different components. This can be done by using a terminal block with multiple pins, one of which is used as the power connection, and one of which is used as the ground connection. The power line is then run from the power connection to the component, while the ground line is run from the ground connection to the component. In some cases, multiple components may be connected to the same power and ground lines, thus ensuring a reliable connection between all the components. Terminal blocks are especially useful when dealing with wires that are too large to fit through the holes in a printed circuit board. In these cases, the wires are instead connected to the terminal blocks, which in turn are connected directly to the board. By using terminal blocks, the designer can create a secure and reliable connection without having to make changes or modify the existing hole pattern. In addition to providing a secure connection between components, terminal blocks can also have several other benefits. For example, they can be used to create electrical isolation between components. This is useful when dealing with low-voltage circuits, as it prevents current from passing between various components, thus reducing the chances of an electrical accident or short circuit.Moreover, terminal blocks are also good for saving time and energy during circuit construction. By allowing the designer to connect multiple components with a single connection point, the amount of time and effort needed to construct a circuit is greatly reduced. Finally, terminal blocks are an important safety feature for any electrical system. By providing a secure and reliable means to connect the wires to the components, they ensure that the circuit is safe from any potential short circuits or other electrical problems. This makes terminal blocks a key element in any electrical system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description