1874497

Voltage - UL:	300V
Insulation Height:	0.610" (15.49mm)
Contact Tail Length:	--
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	7mm
Torque - Screw:	0.5-0.6 Nm (4.4-5.3 Lb-In)
Screw Size:	M3
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Retention Latches (Non-Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Black
Wire Gauge or Range - mm²:	0.2-2.5mm²
Wire Gauge or Range - AWG:	12-30 AWG
Series:	COMBICON SMSTB
Current - UL:	15A
Voltage - IEC:	630V
Current - IEC:	12A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screw - Clamping Yoke (Tension Sleeve)
Plug Wire Entry:	225°
Header Orientation:	--
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	9
Number of Positions:	9
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Terminal Blocks - Headers, Plugs and Sockets

Terminal blocks, headers, plugs and sockets, are all electrical components used to join two wires or secure a wire into a device. Together, these parts form an electrical termination system. They are used in a variety of applications, ranging from simple domestic wiring to complex industrial wiring systems.

1874497 Applications & Working Principles

Terminal blocks are used to connect two wires in a safe manner. Normally, a terminal block consists of two metal contact points, which form a bridge between the two wires. The terminal block is then secured with a screw or other fastening mechanism. The contact points are usually made of copper or tin-plated copper.Terminal blocks come in various shapes and sizes, typically determined by their application. For example, smaller terminal blocks are used in household wiring applications, while larger terminal blocks are used in industrial wiring systems.In addition to being used to connect two wires, terminal blocks can also be used to terminate a single wire. This is achieved by attaching a plug or socket to the terminal block. The plug or socket is then attached to the device, allowing the device to receive the electrical signal from the wire.Headers are used to secure a wire in a device. A header consists of a plastic or metal housing, which holds the wire in place. The header can be secured to the device using screws or other fastening mechanisms, depending on the application.Plugs and sockets are also used to connect two wires and to terminate a single wire. A plug consists of a metal or plastic housing, with contact points at each end. The contact points allow the plug to make a connection to the socket. A socket consists of two metal or plastic plates, with contact points on each connecting plate. The contact points make a connection to the plug.

Conclusion

Terminal blocks, headers, plugs and sockets are all integral components in an electrical termination system. They are used in a variety of applications, ranging from simple domestic wiring to complex industrial wiring systems. These components ensure that two wires are securely connected and that a single wire is terminated safely.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description