1922352

Wire Gauge or Range - AWG:	--
Insulation Height:	0.472" (12.00mm)
Contact Tail Length:	0.154" (3.90mm)
Housing Material:	--
Contact Material:	--
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	--
Features:	Mating and Mounting Flange
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Gray
Wire Gauge or Range - mm²:	--
Series:	COMBICON MSTBV
Voltage - IEC:	250V
Current - IEC:	12A
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	Vertical
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	2
Number of Positions:	2
Type:	Header, Male Pins, Shrouded (4 Side)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and SocketsTerminal blocks, also known as headers, plugs, and sockets, provide a mechanical connection between wires in an electrical circuit. Used in a variety of applications and settings from control and power electronics to communication and general purpose applications, they are widely key components used in a variety of devices.Terminal blocks are electrical connection devices with multiple contacts or connections on a single housing. The terminal blocks are wired with wire or other electrical connections connected to the block through either a male or female connection. The connection devices are typically secured with a secure locking feature that prevents wires from slipping out, providing a secure, reliable connection.The physical type of terminal blocks used for a given application usually depends on the application\'s particular requirements and can range from traditional plug-in modules to ribbon and surface-mount terminal blocks. The size of the module is determined by the number of conductors and the type of termination and spacing desired. One of the main advantages of using terminal blocks is that they are inexpensive, easily available in a variety of character and size configurations, and relatively easy to install.Early terminal blocks were mainly used in industrial control electrical systems. Today, terminal blocks can be found in function power and control systems, along with other consumer electronic devices like television and sound systems. They are also commonly used in office and communication systems such as telephone systems, data communications, and computer systems.For any application, the number of contacts determine the number of available current paths. The range of available current that the terminal block can handle is also an important factor when considering the application\'s current requirements.Terminal blocks come with a variety of connection types for different applications. One of the most common connection types are screw terminal blocks. In screw terminals, wire is connected to contacts inside the block and is tightened with a screwdriver. Screw terminal blocks are secure, low-cost, and easy to assemble.Fuse or Disconnect Terminals are used as a safety device in terminals to cut off electricity when overcurrent is detected. Automatic circuit breakers are connected to the terminals in order control the current and can manually be switched on or off as desired.Spring terminal blocks are often connecting wires in signal systems that require frequent disconnection and reconnection. The terminal contacts can be quickly and easily opened and closed.Another type of terminal block is the Pluggable Terminal Block, which is a terminal block that can be quickly assembled and disassembled. This is an ideal choice for testing and commissioning as connections can be easily disconnected and reconnected.Finally, the Insulation-Piercing Terminal Block is designed for permanently integrating wires into an electrical circuit. The block contains multiple stacked plates that pierce through the insulation of the cable or wire for a solid, low-resistance connection.To ensure a safe connection, it is important to consider the terminal block’s UL certification (Underwriters Laboratories). UL\'s safety test certify that the block is compliant with safety standards and can handle the expected amount of current.Terminal blocks are an essential component in electrical and electronic applications and provide a secure connection between wires in an electrical circuit. With a range of different types available, it is important to consider the device\'s application, current requirements, connection type, and UL certification when deciding on a terminal block.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description