1925809

Voltage - UL:	300V
Insulation Height:	0.591" (15.00mm)
Contact Tail Length:	--
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	10mm
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Latch Lock, Retention Latches (Non-Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	0.2-2.5mm²
Wire Gauge or Range - AWG:	12-26 AWG
Series:	COMBICON FKC
Current - UL:	10A
Voltage - IEC:	630V
Current - IEC:	12A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screwless - Push-In Spring
Plug Wire Entry:	180°
Header Orientation:	--
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	13
Number of Positions:	13
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and SocketsTerminal Blocks are a type of electrical connection method that is used to connect two or more conductors together. They are primarily used for making secure and reliable connections between two electrical components, such as wiring a switch to a light fixture or a motor to a power supply. They are also sometimes used to join electrical circuits together, although more sophisticated methods such as wiring harnessing are typically used for this purpose.The most common types of terminal block connections are headers, plugs, and sockets. These connections are typically made by pushing two or more wires through the block’s entry hole, before fastening a connector to each wire. The connectors fit snugly to ensure that a secure, low-resistance connection exists between the wires and the terminal block.Headers are permanent connections that are typically used for wiring up power sources and components that are not often moved or replaced. They are generally screwed into a panel, and the wires are pushed through the header’s entry hole to make the connection. Headers can be used for either single-pin or multi-pin connections, depending on the application.Plugs are removable connections that typically use a threaded connector. They are usually used to connect power supplies or other components that require frequent replacement or reconfiguration. The plug is threadably mated with a socket mounted in the panel, providing a secure and low-resistance connection between the two components.Sockets are also removable connections, and they are most commonly used for connecting switches and sensors. They are similar to plugs in that they use a threaded connector, but they have an additional set of springs that ensure a secure and low-resistance connection between the socket and the switch or sensor.The 1925809 terminal block is a multipurpose, multi-pin terminal that can be used for both headers and plugs. It is designed with an extra-large wiring channel to ensure that even large gauge wires can be secured. The block also has an advanced locking system to ensure that the connection remains secure in the harshest of environmental conditions.Terminal Blocks are a simple and versatile solution for electrical connection requirements. By using the correct type of terminal block for your application, you can rest assured that you will have a secure and reliable connection that is built to last.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description