1948230000

Voltage - UL:	300V
Insulation Height:	0.555" (14.10mm)
Contact Tail Length:	--
Housing Material:	Polybutylene Terephthalate (PBT)
Contact Material:	Copper Alloy
Wire Strip Length:	7mm
Torque - Screw:	0.4-0.5 Nm (3.5-4.4 Lb-In)
Screw Size:	M2.5
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Retention Latches (Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	-50°C ~ 100°C
Color:	Orange
Wire Gauge or Range - mm²:	0.2-4mm²
Wire Gauge or Range - AWG:	12-30 AWG
Series:	Omnimate BL
Current - UL:	20A
Voltage - IEC:	400V
Current - IEC:	23A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screw - Clamping Yoke (Tension Sleeve)
Plug Wire Entry:	90°
Header Orientation:	--
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	24
Number of Positions:	24
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks, headers, plugs and sockets play an important role in industrial and commercial settings. They are used to connect electrical equipment at its extremes such as source of power such as a wall receptacle, a switch, a fuse, a heater, etc. They are used to transfer electric energy from one circuit to another. Their use is wide and varied, from domestic to industrial applications.Terminal blocks are generally used for high current applications, such as for connecting several power supplies, as the block can carry more current than a single conductor or connector. They are also used as a way to join several cables together and to distribute power to different locations.Headers are small connectors, usually mounted on printed circuit boards, which can be removed and replaced easily. They are used to connect various components on the board. They are also used to connect wires to other components on the board. Headers are generally rated for lower currents than terminal blocks.Plugs are used to connect one cable or wire to another. They can be used to connect two pieces of equipment or to add signals in a parallel or series circuit. Plugs are rated for lower currents than terminal blocks, and have the advantage of being easy to disconnect.Sockets are generally used for low current applications, such as switches or fuses. They are designed to be quick to install and replace. These are usually the type of connection found in homes and other residential settings.The working principle of terminal blocks is as follows. When two cables or wires are connected with a terminal block, the current flows through the block from one wire to the other. The terminal block typically contains a barrier which is used to prevent shorting the two wires, and may also contain an indicator light which shows when the current is flowing between them.In order for the current to flow, the contact points of the terminal block must be brought into contact with each other. This usually involves using an insulated screwdriver, to turn the screw on the block, which draws the contacts into contact with each other.A variety of different terminal block designs are available, including ones with commoning, which allows for multiple wires to be connected to a single terminal, and ones with terminals that can be replaced without needing to remove the wire.The use of terminal blocks, headers, plugs and sockets in industrial and commercial applications has increased dramatically since 1948. They offer an easy to use, reliable and safe connection for all types of products and applications. From simple domestic installations to industrial and commercial applications, these connectors are used to transfer electrical energy and to ensure secure and reliable power supply.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description