1963240000 Connectors, Interconnects

Series:	IE-Line
Part Status:	Active
Lead Free Status / RoHS Status:	--
Connector Style:	LC
Moisture Sensitivity Level (MSL):	--
Connector Type:	Plug
Simplex/Duplex:	Duplex
Mode:	Singlemode
Fiber Core Diameter:	--
Fiber Cladding Diameter:	--
Cable Diameter:	10.0mm
Mounting Type:	Free Hanging (In-Line)
Fastening Type:	Bayonet Lock
Housing Color:	Silver
Boot Color:	--
Ingress Protection:	IP67 - Dust Tight, Waterproof
Features:	Cable Clamp
Attenuation - Typ:	-0.5dB
Reflection:	-40dB
Housing Material:	--
Ferrule Material:	--
Body Material:	Polycarbonate (PC)
Operating Temperature:	-40°C ~ 70°C
Mating Cycles:	500

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fiber Optic Connectors

Fiber optic connectors are an important component of fiber optic technology, because they are used to link two optical fiber cables together and serve as an interface between the fiber optic cable and the equipment. The first fiber optic connectors were produced in their current form in the late 1970s. Since then, technologies have developed very rapidly.The fiber optic connector is mainly composed of two parts: a pin, which is inserted into the back of an optical fiber connector, and a ferrule, which is used to intersect with the other link.Fiber optic connectors are mainly used in two cases, firstly in telecommunications networks for telephone lines or cable television networks, but especially for data transmission networks used in computer networks. Secondly, they are used in fiber end-to-end transmission systems. For example, medical imaging systems, CCD surveillance systems, military systems, fiber optical measurement systems and so on.When it comes to the working principle of the connector, the physical properties of light are used to connect the optical fibers together. Optical fibers are thin glass strands used to carry light signals. The connectors at the ends of the fiber are designed to form a seal on the end of the fiber. The pin of the connector is a half-finger shaped entry point and the ferrule provides a specific fit. The ferrule material in the optical fiber connector is of great importance, and it is usually made of metal such as stainless steel, titanium, or copper. It is important to ensure the accuracy of the fabrication of the ferrule and the cleanliness of the interior of the fiber. If these two requirements are met, the distance between the fiber core and the connector end will be within a very small parameter so that the transmitted and received light signals are connected effectively.When the connectors are connected together, an air gap will form within the connector due to the difference between the connector ferrule and the fiber core size. This air gap will reduce the connection strength and cause signal loss. This problem is known as the fiber contact loss. To overcome this problem, there are several methods, such as using a glass or metal adhesive and an inner liner with a special coating, to fill the air gap. In addition, a fiber optic connector also needs to ensure that the fiber and connector do not move. To do this, a device is typically used to prevent relative motion between the components. This device is usually either a locking boot, or a clamping device, which are available in metal or plastic.These are the simple points we need to consider when using fiber optic connectors. In summary, the working principle is relatively simple; the main thing is to ensure the accuracy of the fabrication and cleanliness of the interior of the connector. Additionally, it is also important to ensure that the fiber is firmly connected, and that there is no relative movement to ensure a good connection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description