1973230000

Voltage - UL:	300V
Insulation Height:	0.894" (22.71mm)
Contact Tail Length:	0.126" (3.20mm)
Housing Material:	Polyamide (PA), Nylon, Glass Filled
Contact Material:	Copper Alloy
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	IP20
Material Flammability Rating:	UL94 V-0
Features:	--
Contact Mating Finish:	Tin
Operating Temperature:	-50°C ~ 120°C
Color:	Black
Wire Gauge or Range - mm²:	--
Wire Gauge or Range - AWG:	--
Series:	Omnimate SC
Current - UL:	10A
Voltage - IEC:	320V
Current - IEC:	17.5A
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	90°, Right Angle
Pitch:	0.150" (3.81mm)
Number of Levels:	2
Positions Per Level:	14
Number of Positions:	28
Type:	Header, Male Pins, Shrouded (4 Side)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks, headers, plugs, and sockets are essential components of many electrical and electronic systems. They are used to connect wires, cables, and other components in an electrical circuit.Terminal blocks are the simplest type of connection devices. They provide a physical connection between two or more electrical components. A terminal block typically consists of two or three parts, including the terminal, the housing, and the housing cap. The terminal is typically made of an open copper sheet metal followed by an insulating material made from either polymer or porcelain. The housing and the cap act to protect the terminal from shock and vibration.Headers are similar to terminal blocks in that they are used to transfer electrical signals or power between two components or circuits. However, unlike terminal blocks, headers typically contain several pins or blades connected to a single connector. These pins or blades can be inserted into a socket or terminal, allowing the header to transfer electrical signals or power from the header to the socket or terminal. Headers are generally used in radio electronics and digital communication systems.Plugs and sockets, also known as jacks and outlets, are connection devices that allow two or more electrical components to be connected. A plug is inserted into a socket while a socket is inserted into a plug. Each plug and socket is typically composed of three parts: the outer casing, the pins, and the insulating material. The pins are typically made of conductive material such as copper and allow electrical current to pass between them. Each plug and socket is designed to accept a specific type of communication cable, so it is important to make sure that the plug and socket you are using are compatible with each other.These three devices are essential components for any electrical or electronic system. They provide essential connections between components and circuits, allow for transmission of power or signals, and provide protection against mechanical and environmental stress. Terminal blocks, headers, plugs, and sockets can be found in a variety of industries, including the automotive, telecommunications, consumer electronics, and medical industries.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description